In the rest of the hour, most of the people began to change windows with wooden frames to their advantage. However, many of them do not suspect about those that others may need additional adjustment of plastic windows.

As a result, navit naydorochchi that okіsnі vіkna can spend their look not to the fact that the installers allowed a low gross damage to the installation technology, but through the lack of information of the masters. So that this did not happen, the reasons for the deterioration of heat-insulating authorities should be revealed.

When dodatkove nalashtuvannya needed?

In the course of exploitation of plastic windows, such moments may come when the chairs cease to lie flat against the frame and stop violating their main functions. At some place, the wind can blow, you can drink from the streets, it’s warm to go.

Sometimes it is necessary to regulate the wind

Sometimes, if you open the chair, you can’t close it through the shifted position at all costs. Even though in a warm period it is possible to survive, then when it is cold, there is a decrease in temperature in the hosts and it becomes uncomfortable to stay with them. In such situations, it is necessary to carry out independent regulation.

The main reasons for loss of tightness of vicons

Under the hour of installation, a relay adjustment of all gaps and the position of the chairs on the floor of the mind and operation are carried out. However, the leather material may vary in the coefficient of thermal expansion and occupy a singing space. Installers under the hour of installation as accurately as possible їх have determined the opening of the containers in order to ensure their technical characteristics. Ale, when the temperature changes on the street, the material can expand as a result of warming, or as a result of cooling. The chairs are especially appreciated.

Understanding Work Modes

Sob vikna can be operated in the cold season of rock, it is necessary to vikonate their regulation. Vaughn lies in the most possible squeezed parts, which are bulging, to the edge of the frame. With whom, it is safe that the materials of the collection are squeezed, and at the hour of the transition to summer, the stench expands. During the transition from a cold to a warm period, it is necessary to avoid the vinification of the abrasion of the coating during the opening of the window and to reduce the wear of the fastening parts. Tobto, it is necessary to change the winter regime of plastic windows to summer. If the installation was carried out inlet, then a reverse adjustment should be carried out.

Vіkno can be open for a number of options

Chi peredbacheno regulation?

In general, the windings do not require seasonal regulation and can therefore be operated for a three-hour period. As far as other changes, then for the obviousness of technical possibilities, it is necessary to carry out their periodic construction. However, in most cases, installers do not tell anything about the presence of regulatory screws and do not give daily instructions for their maintenance. Ale does not mean that there is no such possibility. Therefore, for the cob, it is necessary to look at the chairs from the sides. There, you can open special hexagons or adjusting droplets with recesses at the sight of a star, or you can make an oval shape. On the lower loop there are two, and on the upper one - one. If the stench is daily, then change the regime not to go in and get to change the fittings or improve.

Reasons why you need to change modes

1. The chairs rotten rotten, or they don’t swell right away. This is the result of sagging loops, or the winter position is set on the regulating screw.
2. The crisis strengthened the wind and blew. If it has become an inlet, then, perhaps, it is necessary to change the gum gasket and fix the position of the parts that are being opened.
3. The appearance is sagging. Sometimes it can be the cause of wearing loops.
4. The seating of the chairs should fit right in front of the horizontal line.
5. The back of the head was incorrectly carried out.

For the need, remember the booster

Early preparation

Before vikonanny regulation, it is necessary to vikonate like this:

1. With a watery ganchirka, clean all the sticks that are stuck in the end part of the chairs, as well as the contact with the frame. It is important to avoid getting dirt on the internal mechanisms of opening the visor and on the hinges.
2. Clean the surface of the fittings with a hard bristled pencil.
3. From the details that rub, dry ganchirka wipes are not only rubbish, but old-fashioned mastilo.
4. Replace the amplifications of different daily wear.
5. Apply a regulating screw for adjusting the winter-summer regime with special silicone oil, as well as loops.

Chair adjustment

Before adjusting the vein modes, put the yoga in the correct position, so that at times the faults are distorted, or the sag does not damage the head. For whom, an olive with a soft shear is taken and the entire perimeter of the chair is circled in the closed position right along the frame. It’s not bad to put it on, so as not to damage the plastic cover. Then we’ll see that line vіnіryuєtsya vіdstan vіd іnії up to the frame opening along the perimeter. The normal position is not more than 7 ± 1 mm. In an ideal situation, it may not fall from the sides.

Through the trash licking chairs can be cold

Changing the position of the chairs behind the height

If you are careful about height adjustments, then from the loops you can add a decorative plastic insert and, behind the help of a hexagon, tighten the hinges at the lower part. Tsya procedure obov'yazkovo before tim, like setting up the winter regime of plastic vicons. As from the lower side of the frame, there is a smaller one, the lower one at the upper one, next three days. With a suitable twist, twist the upper screw on the pivobert and reverse the position of the chair. If it is higher, lower it is necessary, then the screw is twisted a quarter, and twisted in the opposite direction. For the upper fastening, follow the analogous lines, so as to ensure even distribution of the fastening on the covering loops. Regulation to carry out doti, docks of the chair will not reach the desired result.

How to reverse the correctness of the alignment?

Properly regulated, it is guilty to vibrate and curl up without the appearance of sounds on the surface to rub. All gvinti, which are considered for the vertical position of the chair, are to be found approximately in the same position. Progumovanі ushchіlnyuvachі pіslya vіdkrittya vіknі mіtіnі approximately the same form іt іt іѕ easy tо turn аt thе vіdni camp. If it is necessary more precisely to fix plastic veils for the winter, then take the usual arch of paper and lay it between the frame and chair, after which the valances are closed and the papers are stained. If you go into it, then the regulation is wrong.

Place for nailing

How to place a window horizontally?

For the fastening of the veil in a horizontal straight line, with the help of rams, the twisting of the regulating screw, stitched on the upper or lower loops, is twisted. Shukaetsya otvіr pіd hexahedron, and then yogo wrappers try to find the necessary position of the window. Zsuv can be reduced by 2-3 mm less in the offending side. Like a chair, you need to put it in the hinges, wrap the screw against the year's arrow, and like to the left, then behind the year's one. Moreover, the lower screw of the regulation screw is fixed when the opening is closed, and then, with a curved way, the correctness of its entry into the frame is reversed.

We carry out the change of regimes independently

It is easy to transfer the window to the winter regime. For this, on the outer surface, a pressure roller is known, which speaks names, with a label applied to the droplet, and it is rearranged in the winter position. It's easy to know with a turn of the handle, shards of stench move straight ahead at their own. If you are on the opposite side of the narrower, then the force of the pressure changes. In the summer regime, the duty is to marvel at the host, and in the winter - the name. To change the position, you need to pull the roller on yourself, turn it, and then push it back. Analogous activities are carried out with the help of gvints and vouchers.

Adjustment of trunnions

How often should I change modes?

In most cases, there are no signs of changing the chairs and changing the regimen, especially as it is new and in the cold period, the chairs fit snugly up to the frame. At the reshti vipadkiv such work can be carried out not more often than once in 6 months. Moreover, it is required to translate them into the summer regime.

Possible traces of incorrect adjustment

All work with the reconfiguration of the modes in plastic vicons is due but carried out in accordance with the instructions. Changing the position of all the guillotines in the "winter-summer" modes without information about their recognition can lead to the use of the mechanism of winding, pressing rollers and the humic indenter. Also, before adjusting, the next step is to correctly evaluate the technical standard of the vicon. In times of increased wear of details, it is not possible to set the winter regime, but it is easy to change the regulation. With the pressure of the screws from the stasis of the force, the person can save his deformations of the camp and not turn around at the exit position, which will cause some change.

Reasons for splitting vicons

1. Factory defect, which led to the recalibration of fittings.
2. Mechanical damage during the hour of operation: cracks in the plastic, sealing of the cladding, glazing bead.
3. Pardons during installation: leaky sealing of the window, incorrect opening of the window in the opening.
4. The removal of internal and external parts for the first hour of operation.

Adjustment of loops

Switching the window to summer mode

The installation of plastic windows for the winter can be changed at the same time for the summer after the weather gets warmer. For this all gvinti, yakі boules were changed to the position of the winter regime, they were due to be turned into a colossal camp. However, at the time of the wearer, it is necessary to secure a stronger pressing of the chairs to the frame. The regulating nut is twisted at the gate, so that the mark marveled in the middle of the place.

Negative aspects of changing the regimes of vicons

Regulative gvinti represent, in fact, the locking of the trunnion, recognized for strengthening the strengthening of the windows. Postiyne їх regulation is threatening with the loss of the main authorities, which strengthens the need for this change. The trunnions, when folded by the handle, move along the straight lines and the eccentrics go beyond the slats at the top and secure the profile to the rim. When twisting the gwent for the winter, it is ensured the maximum susilly for the improvement and wines of such a steel all winter. With this, low temperatures are added to the new addition, and the water is moved. By stretching 2-3 seasons, you can spend more of your power. If you don’t change the winter-summer regime, then you can serve as little as possible for two years.

Vikonati nalashtuvannya is possible for the help of the key

Change the modes chi ni?

The evidence is unambiguous, that the fakhivts are guilty of changing the regimes, the stinks of stench may be aware of that vminnya. Ale tse vimagatime dodatkovih vitrates on yogo viklik dvіchі on rіk ta vitrati hour. The term of the service of the amplifier will be completely lower. From the other side, it is necessary to ensure the conservation of heat during the cold period and to continue the term of the service. Blame the dilemma, which requires the praise of the correct solution, as from the financial point of view, and the security of the minds of the maximum comfort of living. That is why there is no unambiguous food, shards in the skin of a person of their own perevag.

Visnovok

Regardless of the high technology of the process of manufacturing plastic vicons, the stench of the manual regulation of the victoria modes. Why should it be faster, less short, oskolki only in this way it is possible to reach the most efficient parameters of their victories. By changing the winter-summer regime, you can reach the most space-saving chair with the main frame and save heat in the cold period, and ensure sufficient functionality and reduce the wear of parts in the summer. Changes made in due course to allow the continuation of the terms of operation of the vicon.