The popularity of PVC panels is affordable, truly “folk” price and vinyatkova practicability. In addition, the ability to work with plastic can be protected on installation robots, and PVC rails are light and easy to put on the stele, they are easily and quickly installed, which cannot be said about drywall. Someone who knows theoretically how to sheathe a stele with plastic panels, and our article with a top coat and a basic video will help you move from theory to practice.
Why bother with a robot
As the base stele is crushed from a material harder than wood, a perforator will be required. In order to finish the work better, even if it’s a mother’s screwdriver, but there’s no way to do it, get around a set of twists. More need rіven (whether it be water, laser), hacksaw for wood or metal (deposit in the material of future reshetuvannya), budіvelniy nizh for cutting plastic, tape measure, brush, line and olive.
From the materials you need to buy the panels themselves, galvanized profile with underwires or a wooden block for reshetuvannya, fastening (dowel-flowers, press washers), a decorative fold or a stele plinth, an antiseptic primer for deep penetration, be it brand.
Samoriz press washer to serve for fixing plastic, drywall, fiberboard on wood and metal
Rozrahunok kіlkostі materialsіv
The back of the head is measured with a tape measure and the width of the stele and plan, as if lying on the new sheathing for a year - in parallel with the long or short side of the placement. There is one more variant of laying - diagonally, but folded for maistra-pochatkivtsya, we won’t be able to see it.
Porada: at a narrower board, the lining of the lining is laid across, so that the room is optically expanded.
Dovzhina reshetuvannya in linear meters is rozrakhovuetsya for the following formula:
Lathing length = (2a + 1) * + 2a + 5% on the winder, de a - wall length in meters, PVC panels laid parallel to the straight line, c - perpendicular wall length.
In order to find out, how many square meters of sheathing are required, it is necessary to open up the area of the stele and divide it on the area of one panel, not forgetting to add 20% for the overlap and the holes.
Stelovy plinth іz pіnoplastu
Surface preparation
The base stele needs to be cleaned from the old zayvogo, to see those that are trimmed on the new German: shmatki concrete, plaster, putty, that are worn. It is necessary, at some stage, to change the electrical wiring, to expand the distribution of electrical wires and other engineering communications to the required facilities.
Under the plastic, it will stagnate again, so it’s more likely that there will be a splash of this / or a fungus, especially as a more impenetrable sliding surface is installed near the bathroom, in the kitchen. If nothing happened, the base surface is covered with an antiseptic primer of deep penetration. Such a dressing becomes absolutely necessary, as if the “right” stele is broken from a tree, as if it were built in the houses of an individual forget.
The bar of the back of the head is brought in at the place of application and given for 2-3 days, so that it does not warp. Vin is guilty of bringing the temperature and the water content of the place, in which to be restored. After the windshield, the tree can also be treated with an antiseptic, and when fired, with an incendiary warehouse.
The design of the plastic stele plinth allows it not to be glued.
Installation of plastic panels on the stele
Lathing folding
Let's look at how much cheaper the option is with armor from a wooden block. Plastic is a lightweight material, a bar with a 20x40 mm peretina will suffice. Wooden rails are installed along the perimeter and through the skin pivmeter, they are laid perpendicular to the upcoming panels.
- Vimiryuєmo reї and rozpilyuєmo on the vіdrіzi of the necessary dozhina.
- Robimo the olive rozmіtku on the stele, we check the correctness of the equal. This is an important stage, in view of the new laying of the horizontality of the future stele.
- We fasten the dowels on the stele with flowers, constantly changing the horizontality of the equal. If necessary, vikoristovuєmo budіvelnі podkladki for virіvnyuvannya.
- Support the frame with intermediate inserts in the areas, demount the chandelier or the lamps.
- We install along the perimeter a rail for a stele plinth.
- As it is necessary, in the spaces of the lati, it is necessary to install insulation or sound insulation.
Laying plastic on a bar
Sheathing installation
- We fasten around the perimeter a little piece for a stele plinth, not forgetting to fill a gap between it and a bar, which confirms the tovshchina.
- Vіdmiryuєmo plastic on dozhinі and vіdrіzaєmo zayve with a hacksaw for metal, pіdіyde and electric jigsaw. It is also possible to win the budіvelny nizh.
Porada: So, as our destinations are not ideally equal, it’s better not to cut all the panels in one go, but to work step by step, at the world they are fastened on the stele, watching the leather panel with a tape measure.
- Sheathing, board after board, is installed in the gap between the plank under the plinth and the bar, and it is fastened to the frame with press washers.
Porada: you can make recommendations on how to fasten the panels to the wooden frame with a stapler, but practice shows that the press washers are the best. Fastening stapler staples plastic sags for an hour. All the same, it’s necessary to use a stapler, it’s necessary to use more than two staples (12-14 mm), then the design will be durable. 6 mm staples do not fit at all.
Use a clamping element for picking up a lining of any type, including plastic, as the kleimer is called. Klyaymeri in this case can be successfully beaten, but if the installation takes more than an hour, lower fastening on the press washer.
- I will leave the panel cut in width to the required size and close the gap that is left. The white wall is simply inserted under the skirting board, it is not necessary to sharpen the edge.
- We insert a plinth at the cod along the perimeter of the room.
That rare vipadok, if you don’t need resolving in flames
First video
To get a better idea of the whole process of installing plastic horizontal under the stele, take a look at this three-line video, which shows step by step the installation of the grating and the installation of PVC rails.
Now you know how to sheathe the stele with plastic panels. Similarly, it is possible to work with drywall, clapboard, fiberboard sheets, plywood. For sheathing with these materials, it is possible to vicorate a frame from an inexpensive wooden block - it allows you to trim the even surface and superficially trim the upland sheathing. Well, it’s necessary to lower the stele lower, then the bar does not fall, but it will happen to work the metal frame from the supports.