As soon as the first mirror workshop was opened at the All-World in 1373, Nuremberz saw the mirrors become inseparable companions of the people. However, in those far away hours, the mirror could be afforded by people who were not able to. With the help of this technology, the preparation was mirrored, and therefore their power was forced, they were simply cultivated. Now there are no more low shirvzhitok, with a beautiful vdbivnoy building, which you can afford your own skin before. It would have been better.

The significance of mirrors in our life and their marvelous power

True, zastosuvannya dzerkal is important to reevaluate. The stench stagnates in our everyday life, in science, medicine, and optics. Without them, you can grow up light bi buv іnhim. Alemie, we will not fall into a paranoia of paranoia over the drive of their wondrous authorities, even, in fact, those who are at least deserved by our progress. And as it is, then the oddly unfamiliar mirroring has already become our norm. At our apartment, you can often see more than one mirror: at the bathroom, at the corridor, at the wardrobe. With this, all the mirrors are fixed on their points. Here, at the zv'yazku z tim, that our site, on the front of the budіvelnoї subjects, we already have a flare-up of professionalism. How, after all, does the reinforcement of the mirror work in different variations, such as kahel, wall, chipboard? The very topic will be enlarged by our article, about those how to fix a mirror without a frame, on different surfaces.

Methods for fixing mirrors

Irrespective of those that in the front paragraph of our article we saw on the surface, to which a mirror can creak. Here it is also necessary to give respect and to a possible method of securing them. What can be more relevant. And to tell you about the methods of fastening mirrors, then there are essentially three of them: - for additional double-sided mounting tape; - For extra glue. Often, rare flowers bloom at times; - Mechanical method of fixing the mirror. Vlasne about all ways of attaching mirrors, and about the possibility of fixing any of them for a singing surface, we are far away. We will induce specific points in whom.

How to fix a mirror with double-sided mounting tape

The first and simplest is the use of double-sided mounting tape. This material became victorious not so long ago. Moreover, for fastening there is a row, including mirrors. However, here you wash your own, that obezhennya. First, double-sided tape can be used on the back. Tobto mother yakus tovshchina 0.8 - 2 mm. This is necessary in order to compensate and smooth out the unevenness. With this, the tovshchina of the line is to blame, but it’s more than twice as big for the same unevenness on the surface, to the point of a mirror. If it’s important to signify, but still ... In a different way, the technological process of installing the mirror is to blame. In order not to be unfounded, we will give a specific butt for mounting a mirror on a fiberboard plate. Sound like vicorous plates for the preparation of furniture. First, go to the description of the process of mounting the mirror, it is necessary to say about the stitched line, and also about the installation. Mounting line for fixing mirrors can be fixed at the temperature range from +10 to +25 degrees. A few low or high temperatures do not ensure proper adhesion of the stitch to the surface. For installation, it’s better to take a twisted high-quality line, so firm ZM. Available: 9508W (polyethylene base, thickness 0.8 mm); - 4492 (polyethylene base, thickness 0.8 mm); - 4032 (polyurethane base, thickness 0.8 mm); - 4026 (polyurethane base, thickness 1.6 mm). Vitrata of a line is accepted from a dressing of 60 square centimeters per 1 kg of wool. Mind that the mirror hangs straight, and not on the stele or under the chin. In order to make it easier for you to look at the vitrata, you can look at the table. She has a tumbledown of spivvіdnoshennia witrati lines fallowly in the form of її comradeship, dozhini and vaga mirror. Ninі without intermediary before the action. The reverse surface of the mirror and fiberboard, on which the mirror will be glued, next cleaned with the vikoristannym of the ganchirka and the retailer (isopropanol, hexane). Zastosuvannya іnshih razchinnikov for cleaning can say on the adhesion between the line and the material that is glued.
At the same time, I glue the wife of the line. The wives are due to roztashovuvatysya dotted, then along the edge of the mirror, evenly rozpodіleni on the surface. This is necessary in order to compensate for the unevenness of the surface, as it can be between the points of fixing the adhesive tape on the surface of the mirror. For the little one, it is shown and rebuffed, but as a whole, it’s true that we can take it. We accept a mirror on the point, moreover, the backing of the patch from the mounting tape has not yet been tidied up. Robimo razmіtku, sob to put a mirror on the plate for the first time, the shards of ruin yogo do not see. Then it is necessary to remove the adhesive tape from the mounting tape and apply the mirror to the surface. Glue can be accumulated on the mounting tape when the mirror is in a horizontal position. As if it were possible, you can navantazhit a mirror with peacefully dispersed objects from a new one. Accept it, press it on the mirror as required. After some years of hardboard, we will fix it on a new mirror, maybe in vikoristane for making furniture.
This way of fixing the mirror can be used for more obvious furniture, if the mounting tape is stacked vertically. At the same time, the mounting line of the growth is 20 vіdsotkіv. Now about the possibility of using mounting tape for other surfaces and materials. Adhesive tape can be vikoristovuvaty, and vіdpovіdno kіpіtі mirror on metal and metal surfaces, more plastics (ABS-plastic, polycarbonate, polyvinylchloride, polyacrylate, polyefіri), sklo, ceramics, farbovani, priming and lacquer materials, laminated wood. It is not possible to vicorate for silicone and rubber coatings, polyethylene, polypropylene, teflon, plasticized polyvinyl chloride, as well as non-primed concrete or fiberboard surfaces, or else the surface is soft to rose-ballooned. What and why do we think it made sense without our explanations. Now about another option for attaching a mirror, if it is not to be attached for additional glue.

How to fix a mirror for additional glue (sealant)

Well, I know, I don’t want to talk about the surreal. Let's direct a specific butt, which can be used to make other changes, if the mirror is glued to the glue. Our faucet has a mirror on the door. Ale, as always about vicorous materials, so about vicorous glue. For vikoristannya pіdіyde not a zagarbnitsky warehouse, which will not react with a primer and amalgam on a mirror. It means that you don’t want to put a stark looking mirror on the front side. Choose for which acrylic adhesive is ideal, actually acrylic sealant. Yogo can be passed in tubes under a gun. Obviously, all the conditions for the sealant installation are to blame for this on the packaging. Now about the process of assembling a mirror with primed glue. As it is possible, it is necessary to bring the surface, on which the mirror will be glued in a horizontal position. At our place, the door is known and put on the back.
Mirimo, de bude a mirror, and work a rosette.
Now we apply a sealant, it can be done pointwise, it can be done at a glance. Do not apply a lot of glue in one area, spread it peacefully over all surfaces. Do not apply glue on the edges of the installation area of ​​the mirror, so that you do not see it when laying the name mirror.
We put a mirror on the door, apply glue in front, and check until the sealant is caught.
Dali, so that the mirror looked original, mounted a decorative frame. In fact, the frame with a quarter and with kutami pіd 45 degrees.
Її krіpimo on the very acrylic sealant, which is a mirror, zmіtsnyuєmo for additional adhesive tape, until the glue hangs.
Sound the glue dry close finish.
Let's take scotch tape and we can move the door to the point. Vlasne, this option can also be used for other options, if the mirror is glued to the wall. In any case, it is necessary to trim the mirror until the sealant hangs. You can save money for the help of mounting tape, in this way, about which the world was told in the front paragraph.
As a result, the mirror will appear fixed on mounting tape and glue. This is relevant if the mounting tape may not fit with its tasks. Let's say at the bathing room, it's warmer and hotter for an hour. Also, if the wall is primed with concrete or drywall, then it is better to seal the sealant and hang it for an hour with tape. Now about the remaining way of fixing the mirror, about the mechanical fixing.

How to fasten a mirror for additional mechanical fasteners

In today's everyday market, there are faceless accessories, fittings and fittings, in order to wink as a fixing for mirrors. Finish marveling at the photo.
We aim only one butt, with victorious fastening at the looking dowels, with decorative droplets. All other options for fastening behind additional mechanical fastening will be similar. No matter how powerful the forces of the fortress are, it is insignificant to be shaken up. On the back, a mirror is attached to the wall and it is possible to make a mark, where the fastening will be installed and the mirror will be installed. Let's clean up the mirror later.

In order to drill through the required depth of vicorist tape, which is wound on the drill.
So you will see how deep the wall is to be drilled under the dowel. Open it hard.
We insert dowels at the wall.
Installed on the mirror behind the turning side of the plastic damper. In fact, the washers under the screws from the other side of the mirror. The stench is necessary to compensate for the fastening of the fastener when it is tightened and to avoid the breakage of the mirror. Immediately install a mirror on a plate and screw in screws.
On top of the self-tapping screw, we put a droplet.
Axis and all - fixed mirror. Like a bachite, and this option is not so foldable and quite pleasant.

Give a hint about those, how to fix a mirror without a frame on the wall, on the wall of the shafi, on the stove

Summing up, we can say about those options for fixing the mirror as at least three main ones, for additional mounting tape, glue that fixing. And also there are some impersonal private variations. If you think about the choice of any of the options, then it is necessary to say that if anyone has his own advantage, that is not enough. When fastened behind additional mounting tape, that glue mirror is fastened so that it is not visible on what to hang. For whom, there is no need for a special tool. In this case, the sealant is whitewashed in times of high moisture, even as adhesive tape is afraid of water. Up to the minus zastosuvannya glue or mounting tape can be seen as disposable. If you see scotch tape or glue with a metal string, then fix the mirror back to be already richly folded. You need to clean everything and all the procedures while away the back. Mechanically strengthened is good vikoristovuvaty, if you have a cold surface, as if it is slender to rose. Let's say the wall is whitewashed. However, such reinforcement is visible, and it can also be corroded by the year. What zіpsuє zvnіshnіy vglyad, otzhe, є sing minus. Then throw it off and put a mirror on the table, it doesn’t matter for an hour of cosmetic repairs. Otzhe, vikoristovuvaty, which of the options for fixing the mirror to you, we are less likely to be left behind, that the choice will be immutable and the mirror will be seen in our place for a long time and at the same time.

Do-it-yourself window shutters How to pour concrete ceiling. Features, benefits, installation of monolithic crossovers How to build a hatch at the intersection of hollow slabs It is possible to mount slabs of overlap with cracks, chi yak correctly, it is necessary to take care of the slabs Walls from skloblokiv with your own hands. Meister class, design, photo. Do-it-yourself bathroom renovation with plastic panels How to glue a kitchen set with plivka with your own hands, or how to upgrade a kitchen on a budget