The functionality of plumbing is growing. Tsikavim is another novelty - a toilet lid with a microlift.

At first glance, it seems that the detail of the plumbing fixture is not so important. But for an hour, don’t forget to go out to take the cover off for an hour when it’s lowering, after which it falls down, crying out loudly. If so, the plastic can break apart, or on the surface of the toilet bowl, it can become worn out. In such a situation, a cover from a microlift helps.

How to practice microlift?

I will lay down the new building in a smooth and regular lowering of the roof on the obid. As a result, many sounds are not blamed for the blow, and they do not ushkodzhuetsya on top of the attachment. Ceramics always vibrates a dbaylivo occasion, the shards inspire it to the point of becoming unbearable.

Microlift dіє following the principle of a door closer, there are less than smaller sizes. The mechanism is folded only with springs with a rod and hinges. The veneer is opened under the roof of the lid, so that it smoothly rolls when lowered. This function is overcome by the spring. The rod is used for trimming the cap and fixing it in the lower and upper positions.

It is not possible to disassemble the design. With the right choice, it’s no longer practicable as before.

Roof lifting is carried out manually. To lower it, put on a light post, after which the springs begin to fall down on their own.

The road lid for the toilet bowl with a microlift will place the sensor on the floor, at the signal of which, when a person enters the toilet, it goes up, and when it leaves, it goes down.

Perevagi

Not everyone knows yet the advantages of a seat with a microlift, which are like a footstep:

• ease of installation;
• noiseless lowering;
• automation in expensive models;
• Possibility of zastosuvannya for any kind of toilet bowl:
• protection of the ceramic rim for cracks and cracks.

Microlift allows three hours to save the aesthetic look of the toilet bowl. Modern models are not allowed without it, the oscalls of wine are a sign of prestige.

How to buy a seat for the toilet?

If you choose lids for a toilet bowl with a microlift, the price may be significant, but all the same, after bathing the models of the house cleaners. Buying an expensive virobnik in a specialized store, which you have recommended yourself well, you will take away the guarantee of quality, and sometimes you can replace an element that has been damaged during operation in the service center. Prices for covers with a microlift of European quality start from $100 and more, and elite models - from $1000.

Following the victory of American and European companies, as they manufacture plumbing, as they have long mastered this craft and have recommended themselves well. In addition, they have more variety of shapes, dimensions and colors, which gives the possibility to choose a suitable design for the interior of the bathroom.

Choose a seat with a microlift following the improvement of such features:

• it is not necessary to buy cheap vodka, but rather to choose the best choice in the middle range of prices;
• the model may be suitable for the interior of the bathroom;
• next to give respect to the material to be used;
• attachment can be practical, handy, and go behind the toilets to the toilet;
• before the arrival, it is necessary to collect all possible information about the product;
• models can have additional functions: seat boost, automatic lid lift after the person signal and in.

Material

The lid for the toilet bowl with microlift and duroplast is the most widened, which boasts great strength and durability to mechanical strengths. The material is long-lasting, resistant to aggressive chemical environments, easy to wash, taking care of the weather color. The high quality of the hard plasticity is breathed in by the virobs of the Roca Dama Senso brand (Spain). Duroplast caps are often used in public toilets, but they can also be used in home toilets.

Wood tops are also often vicorated, but the stench requires special care.

On some models, the fastening for the toilet lid is easy to remove for cleaning. You can recognize them for the Quick Release feature.

Toilet lid with microlift: repair

Durability of the lid with a microlift is significant in the world to lie in the correct operation. If you lower it sharply, the mechanism will be swept out of the way. To bring an attachment to the diy, to finish a light mail. The grown-ups quickly master the rules of vikoristannya microlift, but in children for the first time ever go. The spring of the mechanism is not secured on a sharp squeeze. You can see the same number of cycles of lowering the lid, or you can spend your power at once. Rizkі mehanіchnі dії lead to breakdowns, yakі do not take corrective action.

The reason for the poor wear of the microlift mechanism may be the wrong choice of model, as well as pardons during installation and operation. Buying a cap with a microlift, you need to protect your feet:

• consistency of the form of the toilet bowl and the method of fixing;
• choose the varieties of the revised varieties;
• focus on the authority's dosvіd.

Sounds attached to the lowering mechanism look simple. Ale sort out її not a trace. Nalashtuvannya is crushed for the rahunok of the spring, as it is balanced under the vag of the lid.

Dismantling the cover

I am a sign that the mechanism of malice is the lowering of the lid with a blow to the toilet bowl. Easier, you can replace the lid. For whom do you need a tool:

• suitable socket wrench;
• pliers;
• metal hacksaw.

With a trivial zastosuvannі rіzblennі rіzblennya zabrudnyuєєtі vіdkrutitі rizblennya folded. Yogo squeeze with pliers and turn the bolt with a wrench. If you don’t give wine, you cut it with a hacksaw.

Installation of a new seat

The new lid is easily installed with a fastening track at the toilet groove.

Let's spin the bolts. The cut should be smeared in front with silicone, so that they can be twisted. Before the residual tightening of the bolts, the design is turned, and also the height is adjusted to the rim of the toilet bowl. When installing shoes, it is necessary to familiarize yourself with the instructions, where the skin operation is described in detail. In some virobs, the lids are equipped with special loops and are easily lifted. In the correctness of the regulation of the seat, lay down the dovgovіchnіst outbuilding.

It is especially important to respectfully put before the installation procedure the covers with a microlift, if there are some additional functions. With a pardon operation, you can easily mess up.

After the dismantling of the building, microlifts are installed on the right and left sides. As soon as the cylinders with pistons enter the warehouse, the oil should be turned over in the middle. When accumulated in one section of the cylinder, they are spread evenly on all surfaces and, if necessary, add to the required amount or replace it again. In case of failure of the oil, or change of the structure, the cover begins to creak when it is curled or curled. Here it is also important to zastosovuvat the correct storage of oily material.

Microlift for the toilet lid is OK for sale.

Components for repair can be service centers, where the next step is to help. Don't bother with the cost of repairs. If it’s in the same order from the beginning of the cycle, it’s better to add a new cap.

Virobniki

The most famous manufacturers of plumbing products, including toilet bowls with seats on microlifts, are European companies. The Spanish company Roca manufactures caps for pneumatic microlifts Roca Dama Senso. The stench is made from stainless steel and is blasted with superiority and durability. The stink of functionality is worn out with different styles, plunging into the choice of purchase. Suvori forms of models fit both to sub-logic, and so to suspended toilet bowls.

In Russia, a joint venture of Santek has been created, as a way of viroblying these products. Spanish varieties can be more high quality of materials, but the Russians do not give a lot of money to them for affordable prices.

High quality products are produced by GUstavsberg (Sweden) and Orsa (Italy). You can get them for average prices, but also expensive premium-class models.

The lid-seat for a toilet bowl made of micro-lift with nano-coatings is made by the Chinese company Portu. Varieties are inspired by different color solutions and new styles.

Visnovok

The lid for a toilet bowl with a microlift is produced in a set with a toilet bowl with a usima in the form of plumbing fixtures, scallops - an indicator of the prestige of the virobu. Behave with it carefully, the pieces of unsorted construction are basically not suitable for repair.