Sliding toilets with a butt attached, handy and practical plumbing. Everything about the foldability of the installation and the connection of the installation - mifi, even with the simplest butt tool, you can solve even specific installation problems. Let's talk about those, how to install the installation for the toilet bowl with your own hands.
Technological scale of installations
The installation of a toilet bowl is called a chain of attached communications, which includes the capacity and mechanism of the zmiva, the back pipe and the supporting frame. It is important that the installations can be installed only for hanging toilets, but we know it is not so.
The most visible setting of the installation is to look from the aesthetic point of view. The toilet bowl is spared a cistern, and all the unfavorable eyes of speech - a drainage outlet and a water supply hose - are hidden in the middle of the empty false wall.
1 - module frame; 2 - telescopic legs; 3 - pouring tank; 4 - trims for fastening to the wall; 5 - zlivalny sewer pipe; 6 - studs for fixing the toilet bowl; 7 - water supply pipe
In most cases, you can order the installation of all black plumbing: rosettes of water supply and scorching, fit the shape and locking fittings. False wall, which attaches structural elements, may not continue to the wall, appeasing the police for any kind of dryer and a niche for installing a water heater.
Fastening steel frames
Installation of the next step before lining the walls and folding the profile frame. Behind the design, the majority of the installations are similar, although the original combinations for the “toilet + bidet” bet are being developed. Abo, for example, expanded frames for fastening to the side walls, as if frontal not capital.
To install the frame, it is necessary to cross it on the underside of the line, parallel to the plane of the future wall, and with a step back to the false wall and facing. The frame under the skin can be sporadzhuvatisya either flush with the front plate of the frame, or on top of it. It is worth laying in the allowable maximum commissary of the passage with the passport of the products and victorious reinforcement.
w - installation width; h - total height of the installation; d – clay; a - rіven pіdloga after laying pіdlogovy pokrittya; b - walk up to the facing area; c - position to the center of the installation
If the frame is set in a line, it is necessary to align them with the diameter, adjusting the telescopic legs. After that, the place of fastening of the supporting studs at the upper part of the vіdpovidno to the big assembly openings and the presence of the free place on the wall are planned.
Behind the applied marks, open it with a perforator and put the installation on the plate. The fastenings should be fastened with 10-12 mm thick anchoring bots, and as a wall or wooden underlay - with steel non-hardened dowels with a diameter of 70 mm. After fixing the brackets in the support studs and lower frame, carry out the rest of the adjustment in three planes, and then tighten all the nuts well.
However, there was no time to hurry up the installation with frames. Shards of the frontal wall may have additional technological significance, then organize everything for connecting the toilet bowl to the water supply and pouring water, and then proceed to the mechanical part.
How to bring water and drain
I have a thought that for the installation there is absolutely no need to stop the installation of a gnuchka of any kind. Chastkovo is true, but it’s not fair to the water supply. At the same time, you can bring to the market the products of virobniks, which they have proven to themselves, the water supply of some of them is even more important and the term of service, similar to PP-R pipes. For this reason, the point of the system's watermaker is close to the cistern, which is simpler to vikonate by the most flexible method.
Okrim іnshhogo, z'єdnanny z'dnannya vozhlivlyu svoєchasnu podgotovka kommunіkatsiy pіd practically be-like the model of installation. The only moment - I will need to lock the fittings and install it closer to the tank, so that the mother can access it through the opening for maintenance, or behind the okrem revision hatch.
After fixing the tank, connect it to a new angry goose, pull the turning part of it with a clamp to the crossbar of the frame.
From the vіdvedennyam zlivu everything is more complicated: wider corrugated pipes for connection are not suitable. Tsya area of installation is left unserviced, here everything needs to be packed, as it seems, on conscience. Vtіm, standard polypropylene fittings for risers 110 mm allow you to expand easily with a width of internal empty vіd 350 mm.
As a tee roztashovuetsya on the front wall next to the installation site, it is installed with two standard inlets at 87 °. If the primary socket is placed to the left, or to the right, or it doesn’t show height, between the waters, a pipe with a socket is added, roztashovaniya pid nakhil. As the empty in the middle of the false wall is wider for the minimum value, the replacement of the addition of the trumpet with a vicorist allows for 45°, 30° or 15° in different combinations.
If the priymalny trumpet trumpets go out only from the sidewalls, it is necessary to bring it to the apex and turn it uphill with the waters at 87 °. At the last of them, one more knee is inserted at 45 °, and a trumpet is blown, which is a frail track to the singing equal.
What? Ce, in fact, the smut food preparation before the installation of the installation. Here it is necessary to know the difference in height between the toilet seats and the evil vvedennia. If the frail draining channel reaches the level of the draining pipe, it is necessary to add one more turn by 87 °, turning the socket towards you. For rahunok three rotary z'єdnan the whole structure is filled with regulation to reach a wide range. It is necessary to install a transitional cuff into the socket, which is included in the kit with a toilet bowl, and then fasten it on a special plastic stand, if the frame is already mounted. In case of any configuration, the scorching chimney of the pipe is to blame, but not less than the recommended 2 cm / m.
Facing and installation of the bowl
The frame is made from a thin-walled profile pipe, so the profile can be fastened to it with large lm-self-tapping screws, or with tighter screws with a head to drill. The butt of a well-thought-out system of installation - if the adjusting nuts are loosened on the inner or rear surfaces of the frame. On the sides and frontal part of the stench, stand at the head of the installation of the frame or the skin, so change it, because you don’t care anything about the tight fit of the profiles.
Otherwise, the frame of the false wall is mounted from the profiles of the PS and PN (50 mm), as for the non-insulated partition. For a number of installations, it is allowed not to open additional revision doors, so that access to the system can be removed by removing the decorative button panel. In a different situation, especially in the middle, other fittings, which are being serviced, must be transferred to the frames of the middle for hatches.
In order to simply and quickly cover the frontal wall with a sack, blocking a number of neat passage openings, repair the sheathing with just one sheet of gypsum plasterboard, slipping the studs into the shackles. We need a total of 4-6 tiles, covering a space of 200-250 mm from the center of the pouring opening to a height of 40-50 cm from the bottom. Obviously, an evil goose and a transitional cuff are needed for the next hour of hire.
After hanging the glue behind the pins, on the front side, the centers of the two passing openings are transferred. Now you can painlessly drill through them like a ballerina, navіt like this, according to the layout, you fall on two or two tiles. Such a method will be especially suitable for thin designer shirring with a narrow neck, as it does not bend the trim on the wall.
Such a technique does not suffice for evil buttons: more overhead panels may have wide margins that are masked. To encircle the passable flange, the tile can be fixed with an excellent grinder with a tolerance of up to 5 mm.
Installing the bowl is even simpler: you just need to put it on the studs, take out the chokers, and then tighten the nuts, pushing the washers under them, which will be shock-absorbed. Having offended, open the humous indentation, as if it is good to press on with the forces of power, smut, do not overdo it from the susillas of tightening.