Carried out at the bathroom, the shoes can be safe. The old standard, if you can install a lamp in the middle of the room, and the sockets and vimikachi may be drunk from the bathroom. This method has not been practiced by anyone for a long time. The electrical wiring at the bathroom is only to be done by professionals.

The main considerations before the electrical wiring at the bath room:

• choose lamps, as they work in the form of a safe voltage - 12V. In this weather you will get light lamps. The stench of the dovgovichny and signify the minimum of electricity.
• all elements of the wiring obov'yazkovo may be protected from vіd vologa.
• the line is due to the mother grounding circuit.
• on a group of lamps and sockets, an ELV and an automatic switch are installed.

You can vikoristovuvat zovnіshnyu and prihovanu cable laying on the walls. During the installation, it is necessary to choose a cable, which is suitable for marking, so that it can be used for the application from the advanced water supply.

If you know all the best, then you won’t get stuck with the problems of electrical safety.

Installation instructions

Krok 1 - Create a scheme

First of all, you should consider the electrical wiring diagram at the bathroom. Think about what electrical appliances you will have and how much they cost. And so, like scorching there will be.

• a rozpodіlna box can be buti outside the borders of the kіmnati.
• vimikach from the box to be taken to the court's office.
• automatics are installed in a leather group of wires, including: sockets, lamps.
• bathrooms must have at least 3 sockets: for a hair dryer, a washing machine and an electric boiler.

If you have a hanging stele, then the darts can be passed through it. Make sure that all sockets and vimikaci are guilty buti 60 cm in water.

Krok 2 - Choice of accessories

You need to select the appropriate wiring elements and those according to their technical characteristics.

To install the electrical wiring at the bathrooms by yourself, we recommend choosing the following materials:

• three-core, copper cable, 2.5 mm pere for sockets, 1.5 mm for lamps and 4 mm for auxiliary equipment.
• dowel clamp for fastening to walls.
• water protection sockets and vimikachi.

Krok 3 - Let's get to work

The back of the head needs to be zgіdno with a scheme of grooving at the walls of special grooves - strobes, under the cable laying. Also, bury the socket, rozpodіlnu box and vimikachi. For this, vicorist a drill with a crown, 68 mm in diameter.

After that, fix the wiring yourself in the strobes for the additional dowel of the clamps. Otherwise, it is possible to twist the cable in a different way - to cut it through the skin 20 cm.

Now you can install the cores of the sockets and vimikachiv at the landing site. Return the decorative cover as soon as possible after the repair, so that it can get lost.

Before the installation of an automatic switch, that ELV can be passed after the electrical wiring is fixed at the wall. Just don't hurry to connect them, because it will be necessary for you to mistake the correctness of the electrical installation at the bathrooms.

After that, you need to expand the wiring in the room, turn the line around with a multimeter and the presence of a short circuit in the fence. There is no yoga, you did everything absolutely correctly. Then you can go to the decorative wall decoration.

Coming soon, the system of building potentials near the bathroom. For this purpose, take a single-core copper wire and connect the case of a cleaning machine, a sink, a cauldron, a bathtub together. All points need to be grounded with a grounding bus, as installed at the entrance shield.

If your shield does not have a grounding bus, then it will be necessary to replace the electrical wiring in the apartment safely.

For scorching, it is better to use an electric sub-tile for scorching. Yogo can be laid out at the bedside. Tse will require special energy.

At the end

On this day, the most popular are gypsum plasterboard and plastic panels. If you are a vicorist, then it’s worth it to ease the electrical installation work. Therefore, when installing electrical wiring near the bathtub under the hanging wall, it will not be necessary to lay strobes, just lay the cable near the corrugated pipe. The corrugation is fastened with clips to the profile.

Apartments often have no grounding. At this time, you will definitely need to replace the electrical wiring. When you check the wiring, also remember that the electrical wiring in the bathroom may be grounded.

Axis and everything that you wanted to spread. Let's hope that our information was for you sensible and corny!