A lot of views of repair work can be done by self-tapping. One of these options is the connection of an exhaust hood to the ventilation system. At this last stage, the home master can cope with the misunderstandings. Especially, if yak povitroprovid vikoristovuetsya aluminum corrugation for drawing. This type of budіvelnogo material during installation does not require any special knowledge.
The corrugated pipe is presented on the market of budmaterials in different options - all color models of small diameter with plastic and serious culvert corrugations made of stainless steel. Material, rozmir, color, price - price for any purchase.
It is easy for the home master to choose the ones that are ideally suited for the celebration of the day.
Through lack of information, you can choose the wrong type of pipe for ventilation, choosing the color or material that harmoniously fits into the interior
Yakoyu can buti corrugation
One of the simplest solutions for the kitchen is the use of a corrugated pipe for connecting the exhaust hood to the ventilation system. In order to buy for yourself those that are necessary, not to ruin the middle of the great number of propositions and not to overpay for the supply, it is necessary to sort out the main types and indications of corrugations.
Corrugated pipes with a large diameter of 3.0-3.6 m can often be run under motor roads and railroad tracks. The stench is installed for the culvert function
The corrugation is actively beaten by alarmists and housewives as an important element in the field of communications. Її popularity is framed by a high mіtsnіstyu, raznomanіtnіstyu razmіrіv and materials, trivial term of service.
In appearance, the corrugation is straight and round. For a kitchen hood, a round pipe is used.
Rectangular variants of corrugations are most often vicorous in virobniki applications
Often you can use corrugated pipes made from such materials:
- galvanized steel;
- stainless steel;
- aluminum;
- textile;
- polyethylene of high and low grip;
- polyvinyl chloride.
Depending on the type of material and the diameter of the ready-made virobu to lay down the area of zastosuvannya. For cladding of butt ventilation, it is most common to buy corrugation for aluminum and stainless steel.
Plastic corrugation, which combines a hood with a ventilation duct, creates more noise, lower aluminum analogue
For the method of making corrugated pipes, the pipes are:
- frame;
- spiral-wound.
The first type of vrobіv є metal frame, fitted with aluminum foil or polymeric plіvkoy. Tse gnuchki povіtroprovody. The stench can turn the building back to its original appearance without deformation after stretching the corrugations for the entire length of the length.
Spiral-wound corrugation is made from stainless steel and galvanized steel, aluminum. Won cost significantly more expensive for frame counterparts.
Another type of windings is made from metal lines. Ready virib є half gnuchki - vіn can be stretched out 2-3 times, but I can’t turn to the cob. To be able to report a zusilla, to put on such a pipe I will need a form, that and follow the deformation to be clearly stitched.
It is a lot of virobniks to make a corrugated duck with thermal insulation and without it. The first option gives you the opportunity to expand the scope of your choice of works. So, with the help of chotirishar flexible pipes, it is possible to lay ventilation ducts as a middle ground, and a call for a place. That one is not a matter of principle.
When preparing heat-insulated slabs, zastosovuyt mineral wool or sklovat
Scope of zastosuvannya
The variety of corrugated pipes is great, which are exactly different by their dimensions and type of material, it is worth mentioning about the difference in the scope of victoria of this material.
Half-width pipes of small diameter, made of plastic and polymers, are actively blocked when laying an electric cable. You can also use a channel for telephone, computer, power and other darts. Most electricians vicorist corrugated with a diameter of 1.6 to 4 div.
Half corrugated corrugation made of galvanized stainless steel has become one of the most relevant options for glazing the scorching system. Indeed, this type of pipe is easier to install. The ability to bend, if necessary, be a kind of winder without damage to the inner diameter of the virobu, it helps to easily bend the cut and other folds of the case for installation.
Corrugation from galvanized and stainless steel is significantly more expensive, lower aluminum counterparts. Ale trumpets from a good material looking aesthetically pleasing.
For ventilation systems vikoristovuyut gnuchki types of corrugated pipes. The diameter, most of the stops for butt ventilation, is 10 to 15 cm.
As for the material of the fibers, then the corrugation, yak is used to buy the maistry for lining the ventilation in the kitchen, the bee is made from aluminum foil. Options with plastic material and stainless steel can be installed more easily.
Such popularity of the gnuchka design is brimming with the security of its installation. Cіna zh cіlkom rozumna і vіdpovіdaє vimogam, scho hanging up to this product with purchases
Ventilation ducts with textiles are vicorated for lining communications in virobnicheskih premises. The stench does not care about the Swedish transmissions again in the reception. The very specialty of spryaє їх vikoristannya in the meat-processing enterprises, in the areas of communal eating and other types of use.
Fabric ventilation ducts are easy to dismantle. Їx is not easy to clean and uncontaminated
Plastic and polyethylene corrugations are victorious for connecting plumbing, connecting water to the laundry, dishwashers and other equipment. When obshtuvannі kanalіzatsії without corrugated pipes also can not do. Especially on folding plots, the choice of hard construction can be difficult.
Corrugation: how to choose correctly
The great choice of corrugated pipes, which are promoted by sellers, can create a lot of difficulties when choosing a suitable option for cladding ventilation. So, to buy the required version, follow the following parameters:
- diameter and dozhina;
- virobu material;
- yakіst;
- price.
The diameter is to blame for the recommendations, we will point in the instructions to the attached model of the drawstring. If you are on a larger or smaller variant, then the road may in the shortest time fail to cope with its functions of removing smells from the kitchen, and in the larger case - burn out in the event of an overvoltage.
Having picked up the corrugation at the store, you need to respectfully check the technical characteristics of the drawstring, and before buying, don’t hesitate to check
That is why it is not necessary to ignore the recommendations made by the virobnik. Sometimes, at the same time, from a knitted bag in a set, a supply of resupply is provided. It's great, if you are guilty of a particular type of mood - the dozhina will be sufficient for that material of power. And if not, then you can independently see the market of budmaterials and come up with a better option.
There is one more situation, if at the same time you can buy a corrugation out of a drawstring. Here we need to be more respectful, even if the seller does not ask about the comfort of the client. Vіn mozhe zaproponuvati deposits or more expensive goods. Dovzhina in this weather needs to be frozen in advance, so that you don’t come to the office, trusting the seller’s advice.
A bent pipe for ventilation at first glance may be 60-70 cm long. Ale extends to 3 meters. Tse varto insure when buying
Dovzhina corrugations, yak is necessary for the installation of a draft with a ventilation duct, is frozen with a tape measure. Vimiryuvannya needs to work at the entrance to the exhaust pipe and to the entrance to the wall. The path should follow the same one, which should be repeated by the trumpet. Slid vrakhovuvat, scho corrugation can be bent, fallow in vіd parametrіv, zaznachenyh picker. For example, 180 degrees.
Possibility of bending under the necessary hood allows you to lay the most optimal path. Mount the pipe at the stretched steel. Tsej moment next vrahuvati.
Another parameter, which is added to the selection, is the material of the selection. Sometimes a plastic version is suitable for the color. In this case, it is necessary to remember about the greater noise, the creation of a wind pipe. If the supply chain is not important, then the range of models can be expanded.
Polyethylene corrugation is not vicorated for ventilation. Qi virobi, fallow of diameter, suitable for transportation and pumping of sip and rare rivers.
Sob the purchase didn’t disappoint, don’t forget about the documents, which confirm the quality of the product, which is to be bought. Do not ask the seller for a quality certificate and a guarantee for the virobnik plant.
Crim of the document should respectfully look at the corrugation - it is not guilty of bruises and suspected underdogs. You don’t need to be afraid to stretch the bell pipe for the whole length of your life and turn it over for the presence of enlightenment chi wild - it’s not your fault. If the corrugation is sumn_vnoї akostі, then the type of purchase is more likely to be considered.
The bent pipe is installed in the ventilation system at the stretched look. It is necessary for him to take a good look at whom you stand in front of the baths
The price is also important. Good before buying, read the similar propositions of other vendors, do not overpay. So, it’s much more helpful to protect the knowledge of the needs of the guardian.
When choosing, next vrakhovuvaty, de bude vikoristovuvatysya corrugation. It is planned to be installed on the street or in tidal ventilation systems, de bude pіdіvіv / koholodzhennya, sіd vnutri respect for the model with thermal insulation. It’s better to buy ready-made virib, then we’ll self-tighten the pipe to insulate the pipe.
Thin installations of corrugated pipes
Connecting the corrugations to the hood, that ventilation system will be under the power of the home master. Shchob vikonati tsyu robot, you need to take:
- bell pipe;
- clamps;
- aluminum line;
- ґrati іz gate valve;
- silicone sealant;
- adapters from round to square.
The stop point will be in good condition at the drop, if the draft has a square or straight pipe, and the corrugation is round.
Є for sale adapters for smaller and larger diameters. Їх vikoristovuvat varto only for the necessary, so as not to change the productivity of the stained glass
All the necessary details are well bought at once from a corrugated pipe. Allow me not to have mercy on the number of spare parts needed.
Usі komplekyuuchі for the possible installation of the windpipe varto pickup, frontally taking the worlds on the installation site (+)
Yakshcho it is necessary to get together with yourself 2 or bellies trumpet, you can speed up with aluminum tape. Better use the material of the metal wires, for the mind of neat gluing on the surface.
The aluminum stitching may not only tie together 2 corrugations, but also seal the torn dirka in a vipadkovo way.
The corrugated pipe needs to be stretched for the entire length of the pipe. In such a station, one point needs to be attached to the outlet pipe of the drawstring. For fastening, use a vicorist with a metal pipe and sealant.
Apply varto sealant only on dry and clean surfaces. In another situation, you can't close the sticks properly
Let's sweat through the skin 1.0 meters vertically or 1.5 meters horizontally, laying the corrugations is necessary to put additional clamps. Tsі pristroї ensure the correct fixing of the wind pipe. As far as the ventilation opening is only 0.5-0.8 meters, then you will not be able to install additional clamps.
With a large length of the ventilation duct, the next thing is not to work the hospitality of the kuti - the skin from them reduces the productivity of the hood by 10%.
If it’s more than 3 meters to the entrance at the ventilation, then it’s necessary to tighten the model of the drawstring, or stretch the corrugated pipe right under the stele, to speed up the way. Adzhe chim who finished the channel, tim stupefied may be obladnannya.
Putting additional clamps, get rid of the back corrugation with a ventilation opening, inserting another end at the opening of the wall grate.
Wall grilles for ventilation can be installed with a gate valve or without one
The grating sticks with the pipe are also well done, vicorist sealant. Now you need to check the quality of the installation. For whom it is necessary to turn on the drawstring and put the bow on paper - if the wine is attracted, then everything is well mounted. Otzhe, you can proceed to the decor.
As a decor, you can vikoristovuvatisya decorative casing of the draft itself. Somebody is obviously not enough. Then the Vlasniks add fantasy, choose the most optimal option, for example, close the pipe in hanging caps.
A different ventilation duct is installed in a plastic box. As if to mount it in a new substation, no one can guess about the metal corrugation in the middle.
Fallow in the style of the interior of the kitchen, the corrugated pipe can be hidden under the wall. As for the furniture in the hi-tech style, the metal corrugation will organically fit into the big picture.
Buvay, scho povitroprovid miraculously fit into the interior of the kitchen, being a logical continuation and not straying from the wild composition
If you need a pipe replacement
Corrugation is an inexpensive and even better solution to the problem of installing ventilation in a booth. If it is installed correctly, then there will be no problems with vikoristannyam. Golovne to dorimuvatsya recommendations, appointed by the virobnik virobu.
It is especially impossible to watch the corrugations of the winder. One thing is unacceptable - he drank zі stіn dіstavati already clumsily. At 3 o'clock, at 8-10 o'clock, at the end of the day, blow the trumpet to make sure that you pour it from the particles of fat, garou, saw. Clean yoga do not go into. The only change is to install a new corrugation.
If we change the term of service for 10 years from the date of the new ventilation duct, then the change does not look like a problem.
When replacing, it is possible to dismantle the old pipe first, and then carry out the installation of a new one
When dismantling, it is necessary to restore all the things that were done during installation, more than in the reverse order. After removing the pipe, it is necessary to thoroughly clean the sticks, clean the ventilation grate or replace it. Let's viconate all the way to the installation of new corrugations.
Video about choice and installation of corrugations
Video clip about those, how to turn on the refurbishment in the kitchen - the features of the corrugated pipe:
The corrugation is metallized, which is victorious as a povitroprovid in the kitchen, it can be hidden behind a decorative casing. This video instruction will help you to correctly visconate її before drawing:
First of all, a video about additional details, which are victorious when the pipes are connected from the corrugations to the draw:
Video review of the corrugated corrugated pipe for aluminum:
Tsіkavy video clip about those, how to vibrate windings from aluminum foil:
Having sorted out the features of the choice and the installed corrugations, you can spare it by scoring everything with your own hands. These robots do not require special skills and professional tools, which allow the facsimile to disappear. Yakіsna corrugated pipe, correctly delivered to the draft, building to ensure the ventilation of the kitchen is not less than the next 10 years.