The decorative part of the lampshade, vikonan from fabrics or thin plastic, is hard to fit, but don’t hurry to find out if you need a river.

The main value of a floor lamp or another lamp is a mechanism into which a light bulb is inserted, that electric warehouse. At this master-class, decoupage of a lampshade for a lamp, a bedside table or a floor lamp is reportedly looked at. The old lamp will become an exclusive interior item, which you will show to your guests with joy and pride.

Preparation of materials and important moments

The ceiling is taken as a basis from a small “hole” on the bots. Zrobleniy vin made of plastic, glued to the beast with textured paper of erysipelas color. The seam of the white cover can be seen well.

In order not only to restore, but to restore the lampshade, having spared the dirks, you need:

• round servettes for decoupage good quality), at the butt - little spices for mulled wine, such a small glass is not necessary;
• bіlі servettes and papers for recording horny color;
• scissors;
• rare trellis glue;
• PVA glue;
• a glue gun and a short cut;
• namistini red color;
• bіla matova farba or primer;
• brushes: small and wide, div. 5-6;
• prask;
• sponge for washing dishes (clean, dry);
• water.

For decoration, be it a server with a whole little baby, which will go for the color and theme to your interior. As you can see, how to change the lampshade for a floor lamp with your own hands, wink the lights that are shading in the bedroom. For a lamp in the kitchen, there are images of fruits and vegetables, for a child - toys and cartoon characters. Here vykoristano spice motifs for mulled wine.

For decorating vikoristan simple technique direct decoupage, read a report about all technologies on our website "Zhіnochi zakhoplennya".

Preparing the lampshade and servettes before decorating

First, it is necessary to lay a hole, a gap in the lampshade. Take care that a perfectly smooth surface cannot be reached - the servets do not lie down evenly, there will be a deak texture.

Close the slit by placing the plastic pieces on the defect. Glue an erysipelas piece of paper for writing on PVA glue (sold in square briquettes).

From the front side, stick on PVA glue a spear of balls of a white servlet and check it while the design is dry.

In another way, for decoupage, the lampshade needs to be primed for the best connection of servettes from the surface. You can take a white matte farba instead of a primer. To walk with a primer or farboy on all surfaces with a wide penzle, creating an even ball of white color. Such a farba is dry, shvidko, to the one that was applied with a thin ball, in fact, on papyr, approximately for the first year.

After that, like a farba is dry, you can proceed directly to the charming decoupage process. The servos will require preparation. To prepare them for the process, it is necessary:

• take two balls (sound the stench bіlі), recreating the color ball;
• Carefully iron the colored ball out of the swirl with prasko for virіvnyuvannya.

Respect! When working with praskoy, take care of safety equipment! Having choked on creativity, you can forget yoga, turn it off and get excited about it!

The lampshade for this master class for decoupage may have a diameter of the upper ring of 19 cm, five servettes were placed on this decoration. Two more went to work internal surfaces that decor is calling.

The servettes taken for decoration had one particularity. The stench is full of colors, the cream of one fragment of a little one is a star. The author of the MK did not like it, as the star lay down on the rozhevy, fumbled with the lampshade, then it became a skin stepping servlet to twist the star to the front. In this rank, the color and ardent moods appeared as one.

In the photo there are servets with trojans, shards on the back were planned to spread fragments with trojans on top of the "mulled wine", but in the process of the robot it turned out that it was a zayve.

Decoupage technology bit by bit

After preparation, you can proceed to decoupage the lampshade with a hand. Here, it’s better to hurry up to help one more person, so that there is a trimala lampshade to finish off mіtsno, on a vase. Sometimes you can put it on the table, but marvel that nothing stuck to the virob.

I will smear the surface with adhesive particles. Glue when taking tapestries, by analogy with pasting walls, so as if it were good to get into papyrus and lie evenly, and when hanging, "pull in" all the unevenness.

Smear one part with glue and level it with a wide pencil. Attach a part of the servette, pressing step by step from the sides. Glueing a servlet may be impossible, then destroying it without zipping the robot: since thin paper seeps through with glue, when you try to stick a fragment, it will tear.

For this MK, servos for decoupage are glued to the lampshade on the stake, and the excess is bent in the middle. More was said about the sights of the white color.

Respect! To clean up the excess glue, hurry up with big balls of servets, which are vicorous.

Gently ruhayuchis, step by step brushing the lampshade with glue, squeezing the servets, glue the entire surface. Possibly, in certain places, the papyrus is called troch, otherwise excess glue accumulates under it, but if it hangs, the residual decor and details can be easily corrected.

The axis looks like a lampshade in the middle.

Cut the rounded edges of the servets into sprat parts and bend the middle, smearing the inner part in front.

Since the inner part of the lampshade may look neohaynoy, to that varto add fragments of servettes there. Tse trivatime is close to 5-7 whilins. For even gluing, use a sponge to cut the dishes, and sometimes use only your hands, pressing the smaller fragment with your finger.

Let the robot dry well.

Zavdyaki to the fact that the little ones are not confused, on the front side of the lampshade with decoupage, there is a panache without a border. It is easy to fix it with the help of clear images of small pieces of orange, as if they were left out of the design of the inner side of the viroba.

Divide the oranges (or rather, separate the fragments with your hands) and place them there, de їх do not stick to the composition. Glue them just like that: smear with glue, gently pressing a fragment of the little one and smoothing it from the center to the edge.

For example, cover the lampshade with glue to the beast and re-dry it.

Completion of the work and the remaining touches

After that, as the main stages were completed, the coating of embellishments for the decoupage technique of the lampshade with acrylic lacquer, and the neobow'yazkovy croque, was lost. For dry applications, you can cover the little ones with hairspray, but make sure that you can’t wash it with water. Ring out tse and not necessary, finish and wave your saws with a special velvet cloth for picking.

As you have done, cover it with acrylic varnish, work it for doba after hanging the main balls with glue.

To complete the image, you can embellish the robot with the great red namistins with the help of a glue gun. Numerous decorative elements give off a brown-yellow-hot spice for mulled wine;

Tsikavo! After the completion of the work on the interior detail, it is easy to say that there was a seam and a hole.

If you are “ill” for decoupage, then take a look at our other master class, for which you will find stylish and fashionable.

Decoupage practically doesn’t help the beginner, don’t be afraid to start it, start it like before, take it to work.

Instruction

Dosit frequently updates require old floor lamp s with fabric lampshades on a dart frame. Before the cob, work to lift the lampshade of the lamp and remove the old close-fitting. The best shyness over the great arkush paperu. Wimite frame and dry yoga.

Modify the frame and create a shape for a new covering. What do you have floor lamp with a cylindrical lampshade, measure the height of the stem and the length of the stake of the lower ring of the frame. To create a rectangular shape, taking the height of the stalk as the height of the rectangle. Dovzhina vkroyki zrobіt equal dovzhina stake of the lower ring of the lampshade.

Whether the sides of your lampshade are squares or trapeziums, cut the sides and cross the shape for one detail. For a new upholstery, you will need to see the styles of the details, the lengths of the sides of the frame.

Pick up fabric for the lampshade. Sob tse robiti, marvel at the krіz material, which fits in the distance with the colors of your interior, on the vmknenu lamp that is assessed, how the fabric is framed and passes light. Lampshades made of thin fabrics, where the lamp and the frame can be seen clearly, it is recommended to work on the lining.

Check out the fabric details of the upholstery prepared with a vikriyka. Add allowances to the upper and lower sides of the vikryka, enough to bend the fabric, and to make a drawstring for the gum or the cord. If you have cut the shape for one segment of the lampshade, add allowances for the seams on the sides of the part.

Finish the details of the lampshade with an overstitched seam and sew them on the sides. Pull the lower and upper allowances in the middle and stitch the drawstrings, having closed a small opening, through which a gumka or a cord can be pulled.

Wrap with a single-color bavovnyanoy tasma stitches and offend the ring of the frame. Stretch the fabric and insert the elastic bands into the drawstrings. The finished lampshade can be additionally finished with textile or beaded fringe, sewing it to the fabric of the bottom ring. The top of the lampshade can be embellished with quilts from fabrics, as a style, in which the room is decorated, if necessary.

Attach the updates of the lampshade to the lamp stand.

Floor lamp gives m'yake bіchne svіtlennya, svoryuyuchi zatishnuyu atmosphere at the host. The screw is handy in operation, it can be put in the way you need it at the moment. Podlogovy lamp, decorated in an original rank, becomes a bright accent near the room. If the hour has come for your floor lamp to remember or refresh the lampshade, then it’s not necessary to go to the store for a new interior item. Add a little bit of fantasy, so that your old speech will light up and shine in a new way.

you need

• Lampshade at decoupage technique:
• - Cursing lampshade;
• - Garni servets;
• - alcohol or miyuchy zasib;
• - Knives;
• - glue for decoupage;
• - Penzlik;
• - ganchira.
• Fabric lampshade:
• - an old fabric lampshade;
• - New fabric;
• - tracing paper;
• - olive;
• - Knives;
• - sewing machine;
• - Threads.

Instruction

Lampshade at decoupage technique You can pick up the lampshade, be it a miraculous one, or wipe it with a cotton swab soaked in alcohol. Spread a soft pad on the table, so as not to splinter it on the working surface.

Take servettes, whose ornament will decorate your underlay lamp. new design the floor lamp is to blame for harmoniously fitting into the interior. So walk around with your servettes around the room and think about how you can see the little ones from the outside. Earn a small amount for those who are lightly crazily sloping lampshades to create colors that are transparent and bright.

Carefully cut the little ones from the servlet. For ciєї, it is best to use knives with rounded edges, so as not to break the thin papier. Vіdokremte kolorovy upper ball.

Transfer the ornament to the lampshade and glue it with yoga glue, carefully spreading the penzlik over the little one. Vykoristovyte special glue for decoupage, having changed in front, which wines are suitable for the eyes of the surface. And then you can see the separation after hanging. Zakriplennya servets varnish neobov'yazkovo.

Dry your decorative pattern again and install the lampshade on the table.

Lampshade made of fabrics Support the seams on the fabric of the old lampshade in the places of the original bonding with the frame. Work carefully, so as not to damage the details. An old robe on a floor lamp in the light of a long-standing victoria can be trendy.

Divide the old fabric into details. Add them to the tracing paper and cross the form. Like an old lampshade, the material is tightly stretched onto the frame, to work accurately.

Sew a new version from vikriyka. With thin fabric, as well as translucent, stitch the details with a “white” seam. As if the fabric is slit, finish the edges with an overlock. Iron all seams.

Pull the sewn lampshade onto the frame. To make it easier for the robot, wet the fabric on the back, and then fasten it with threads on metal parts. Let it hang from the stretched look.

Close the lampshade on the stand of the floor lamp.

Korisna porada

Remember the floor lamps. Light can be warm or cold, white with other colors. Choose those lighting, when you feel the most comfortable.

Jerela:

• lampshade decoupage in 2017

What is your hut it’s not so garni, like before, otherwise you’ve lost it, sell it, varto have mercy on it, like it’s new. Possibly, from the widths of the stretch, it will stretch, yes, it will flow or hut zovsіm do not trim heat. All these problems can be easily overcome with the help of modern technologies and materials, and if you hire a budding team, then practically nothing will happen. So chi іnakshe, to renovate the old hut, it is necessary to viskonat takі dії.

you need

• - an hour and a penny;
• - materials ( covering materials, siding, plaster, farba toshcho);
• - Working hands.

Instruction

Repair the debt hut the new one looks out of the window of the door. No insulation will bring any result, as the doors and windows will be skewed and cracked, so replace or restore them.

Invisible to the design of our home interior are chandeliers and floor lamps. The most beautiful element of them is the lampshade, which is ideally responsible for the design solution of the place. It’s only too easy to pick up a lamp with a necessary lampshade. It’s better to save an hour on jokes and spend yoga on cooking do-it-yourself lampshade. And even richer ways, for the help of such people you can work. Deyakі rukodіlki vyazhut tsі elements for chandeliers and lamps, vicorist with different techniques, іnshі - shiyut. Only for whom is it necessary for the mother to know that vminnya. At this state, we made an order of lampshades, so that you can work with your hands from the simplest materials in a short period of time.

Let's move on to the characteristics of the design of the leather lampshade, first of all, how to prepare the foundations for them. Any of the frames presented by us can be twisted and for the creation of a floor lampshade and for a chandelier.

Base for lampshade

The frame of any lampshade can be buti, persh for everything, stable and mіtsnim, sob vіg vіg vіgrimati be embellished, like mi zastosovuvatimemo for decor. The best options for preparing the frame are:

On the butt the rest option Let's say how the foundation is created. Father:

I would like to designate, such lampshades are created and without a foundation. For example, it is possible to work quietly, as if they are being prepared in the technique of origami, or by gluing metal objects together with a path, as if they can create their own design even if they are hard, for example, they can be made of wood or metal parts.

How to build a lampshade for a chandelier with your own hands?

Here are some original options:

How to build a floor lampshade with your own hands?

It is as easy to build a lampshade for a floor lamp as it is for a chandelier. Before themselves, in our opinion, the original ideas of preparing such lampshades can be seen:

A lot of rukodilok sheathe frames with fabric in the form of old speeches. For example, tse mozhe buti jeans chi shkir. Obviously, it is necessary, vicory such materials, vrakhovuvaty, that the stench practically does not let the light through, so for the lampshade of the lamp, which stands on the working table, the stench does not go, but as a night lamp you can vikoristovuvat.

Zagalom, as you have grasped the mind, the most convenient time for the preparation of lampshades is the preparation of frames. Reshta - on the right is the technique of keeping hands. Try your hand, and let everything come out of you, for what you will take!

Buvay, what a lamp, what is rightly practiced, but love is a night, what is it that you are getting away from your grandmother, working properly, but suttvo patrpavshis ... ... Believe me, there are at least 20 ways to improve the situation: either make the old lampshade better, or beat Yogo for the new one, or, to the extreme edge, winkout, having created the replacement of the new one, it’s mega-creative!

A couple of words from history: at the translation from French, abat-jour is translated like a “muffled light”. Previously, similar mufflers appeared about two hundred years ago, and yet their ancestors - zaslinkas for tar-skip and candles, bulding a long time ago. Until that memorable day, when the talented designer Louis Tiffany tried to create his first lampshade in a broken, different-coloured fold, the stench was made exclusively from fabrics. Approximately one hour from Tiffany, another no less talented designer Antonin Budinka, came up with a crystal lampshade.

Today, crystal, fabric and fold on the right can not be dispensed with - lampshades are practically shattered from any known material. You can also win practically everything that you can eat under your hand - it’s a smut, the combination that feels like the world is right! Otzhe, 20 ideas for inspiration.

Fabric lampshade

You can choose the fabric absolutely be-yak - from organzi to jeans. You can simply re-tighten one fabric frame again, or you can create a whole collage from different ones according to the texture and color of the clapboards. It is also possible to make a piece of cloth with ready-made buds to sheathe an old lampshade. You can dress up a child's clothes, as you have created the author's axis of such an original litter box - a bed.

Zastosovuєmo v'yazannya

As if you have an impersonal, non-corrosive glomerulus, or an old wearing light - when you put together a new lampshade, you will smell obov'yazkovo! Obviously, you can tie up the frame of the bedside table anew, and then sew a warm "cover" from the indecent light. Vstromte in a new knitting needle, let's start knitting, or put a hand on the cat with yarn - and the atmosphere in the booth in such a calm dribnitsa will become warmer!

Greening the territory

Brilliant and, as often happens, even more simple idea. We take a flowerpot with the greatest growth and fasten it in the frame of a floor lamp of a worker. Looking more creative and perky.

Merezhivo abo threads

The old version of the feed, which was rich with us at school - inflate the bag again, so that it looks as round as possible and wraps it with a lint thread or a straw, periodically soaking it in glue. If the robot is dry again, the bag is pierced and beaten. In your hands you are left with a garna kul with threads of straw.

I propagate the replacement of vicory threads and knitted servets! But remember, shovel the sack of varto only in that fall, if all the glue on the floor is dry and the lampshade has become open!

Chinese likhtarik in a new way

A simple Chinese likhtarik can be revived in an evening to the point of being unknown for the help of fabric prints and splendid gouache! Just paint on the lichtarik of the sakura tree, creak for the help of glue, that’s all!

Papier chi pictures

One of the simplest options for updating an old lampshade is to paste over it with veils from newspapers or old photos. Some people are smart enough to make inappropriate X-ray pictures!

Upgradable fabric lampshade with decoupage

Today, the prices are high, the vodka is prepared with a hand. Of particular value are the elements of decor, created from old, uncommon speeches. It would have been better if the items had been worn out, which had served a lot of rock, they could not be brown in the state.

Ale, in the hands of gentle masters, such objects are transformed into original decor elements. For example, with your own hands you can create an original lampshade for an old floor lamp from an indecent thread material.

To open the lampshade, it is necessary to prepare:

• Vіdrіzok neprіbіbnoї, аlе qіlої аnd clean fabric.
• Knives.
• Roulette.
• Thread that head.
• Pins.
• Maybe glue.

It starts with an idea and proceeds to its implementation

You can restore with your own hands like a lamp, so be it another lamp. Taking the design of the interior as a basis, we will think over what kind of ideally pidide before decorating the room. For the country style, we choose the fabric for the lampshade from the kartati vіzerunok in the photo, to the current version of the design of the lampshade, creations from threads. Before speech, for the creation of an original lamp, you can form the frame of the lampshade with your own hands, vicoristing for this great dream and a trifle of fantasy.

Nasampered, for the creation of a lampshade, it is necessary to measure the diameter of the lamp and its height. If it is planned to create a fabric lampshade, then it is recommended that you choose a more or less lion. Vіdmіryavshi, zgіdno z otrimanimy earlier rosemіry, nebhіdnіy vіdіzok materії, namіtaєmo yоgo vyvorіtnogo side. Namitny seam was laid from short sides of a fabric rectangle. As a result, a cylinder made of fabric is to blame. Then, the fabric is viverted on the front part, and the quality of the seam is re-verified. The threads are not guilty of vibrating and mіtsno trimati two parts of the fabric.

The finished cylinder must be inserted into the lampshade and stitched, so that the lower part fits snugly to the edge of the frame. If the fabric is kicking with spit, it means that the preparation of the vikonan is wrong. Її to happen again.

Like a fabric blank, it ideally fits to the lampshade, and it can be glued, evenly spreading the fabric. After firmly gluing the fabric and zachekavshi, while the glue is still dry, you can proceed to the processing of the upper part of the structure.

Before this, how to fix the fabric with glue, it is recommended to mark the future seam with hairpins in front. Even more importantly, the matter kicked in soft folds and looked like a single whole with a lighting fixture. As soon as the ideal position is found, the fabric can be glued to the frame. After the residual hanging of the glue, remove all the threads, hairpins and proceed to the final trimming.

Decorative decoration

As soon as the finished lamp looked pleasantly and originally, the lower part of the frame was decorated with beads to hang. Sob master-class z embellish the wiyshov with the helpless, do not hurry up and turn over the workmanship until the glue hangs completely.

For greater efficiency, the lamp can be embellished with lace or stitches, as shown in the photo. As if on a lampshade, deaks wadis are placed, they can be veiled by great namistins or bliskitkami.

Lampshade made of threads

Finishing the original and downtime on the vykonanny є shaping the lamp with your own hands for the help of knitting threads, in the photo. If you take this technique as a basis, then, using an incomparable lamp, you can create a sprinkling of similar decorative elements and twist them to decorate the interior.

Meister-class from the creation of a thread lampshade, vimagatime:

• Dekilka of skeins of different color knitting threads.
• Inflatable bag of round shape.
• Lamp.

It is necessary to inflate the sack on the sack and tie a white and її foundation thread. Dali on the spool winding the threads as much as possible їх, pulling, but not changing the shape of the spool. Thread balls can be spliced, moreover, the threads can kick quite a bit or create a be-a kind of vizierunok. After that, as the threads are wound, the entire structure is leaking glue. In this case, the glue should not be broken, the more glue will be applied to the threads, the more glue will be prepared.

They gave a design, made with their own hands, then stripped the glue until completely hanging. Let's sweat the sack and roll up the name. The finished lampshade is ready for the victoria. report instruction zі dvorennya décor z threads, proponovana on video.

Meister class from paper

Even if the lampshade is created unusually for embellishing your booth, then you can completely wink the papyrus, from which the lampshade for the lamp is created. For such a design, a wide frame is needed, which does not stick with an illuminating lamp.

I’m ready to either crush the base with my own hands, glue it with blanks from a corrugated or wonderfully colored paper. You can add such a vibrancy to paper or fabrics, appliqué blanks to look like images of blizzards, flowers or zirochok.

If you create a lampshade, you don’t want to mix up a fantasy, it’s possible, experimenting, you create a flower, I don’t resemble a similar composition.

In this manner, it is possible to build a garniy lampshade independently from whatever material is available. In order to prepare the result by filling in your writing, varto vikoristovuvaty different options for modeling and decorating. I, singsongly, the result is to turn over your points.

In contact with