Without such a plumbing fixture as a toilet, it is still important to maintain normal living conditions in the apartment. Only, like plumbing, you can get away with it, and it’s more likely to happen, but it’s not even suitable for meshkans. You can have a lot of luck in this new place with your own hands without calling the master home. Adjusting, for example, the button on , if it goes down or doesn’t work at all, but completely replacing it with a new one is completely realistic and independently without getting fakes to tell people, because there’s no great hope under bnih works.

Device and principle of operation of push-button tanks

All water tanks are structurally similar, the difference lies only in the water starting mechanism. It is a place to save water needed for flushing the toilet. To be equipped with robotic fittings elements. Folded with:

• filling valve;
• float;
• evil mechanism;
• zakhistu from overflow.

The principle of operation of the milk tank is simple. When the float position is lowered down, water flows through the fill valve, which ensures that the level of water flows into the tank on the bottom side.

Tank with button

The floater itself feeds to the filling mechanism and lifts it with a robot, rising when the tank is filled and lowering when it is empty.

Respect! In addition to the basic sewage tanks, in which the water is connected to the side, today other types of devices are increasingly leaking. The water is being supplied to the tank below. The smells are eliminated from the devices from the waste connections to the membrane valve that regulates the water supply.

The drainage mechanism is removed manually using an additional button on the tank. It has an overflow protection - a rubber element of the tank, which is adjustable in height when the border is installed at the same level. If it is moved, it will exit directly into the sewer pipe without spilling over between the containers.

Types of push-button flushing mechanisms

The drain valve is connected to the tank with a button. When pressed against it, water flows into the toilet. Storm mechanisms occur due to:

• one button;
• two buttons.

In the first option, when you press the button, the entire volume of the middle of the tank flows into the toilet. The button in another option is divided into two parts. If you press the small button, you will be afraid of the driver. And if you push on the bike, it will fall out of the tank and into the toilet in a permanent relationship. This arrangement allows you to protect the water in your apartment and not overpay for water consumption in the event of an outbreak.

Malfunction of the toilet button

Whether the subject of insurance for the song term vikoristannya. So the term for the service of the button in the toilet also varies. However, it is possible to get out of trouble sooner, since the mechanism was initially fragmented from an incorrect frame. And if the button begins to function poorly as a result of mechanical damage, it may be necessary to replace it with a new one.

Button mechanism for toilet tank

Due to this and other malfunctions of the mechanism, the button when pressed may:

• stuck - you have to press the button more than once to drain the water;
• fall through - the button goes down when angry, the sky falls in the middle.

Elimination of breakdowns and malfunctions

If the button sticks, and it takes a lot of pressure to drain the water, then the problem is all about the rod that connects the drain valve to the drain device. To repair it, you need:

• block access to the water tank and lower the one that is in the new tank;
• Open the tank by removing the cap, then unscrew the locking ring from the part of the button in the middle and remove it. Afterwards, release the button;
• repair the rod or replace it with a new part;
• After repairs and frequent replacement of parts, take everything back.

Porada. If it is necessary to replace the rod, but it is not possible to immediately install a new part, you can immediately replace it with a self-propelled element, made from the same material.

If the button fails when pressed, one of the reasons for this may be a break in the spring that rotates the mechanism at the output position. Here you will need to replace the broken part. Another possible reason for the button to fail may be an incorrect selection of the adjustment height when adjusting the valve mechanism. To remove this, you need to turn off the water supply, drain the excess, and remove the cap from the tank. Then remove the drain valve. Having loosened the clamps, adjust the height of the bottle, then take everything back and check how the system is working.

Pull-down button for the oil tank

Replacing the button with a new one

Sometimes it happens that the sealed part cannot be repaired, or it can no longer be repaired. Then you may need to replace this button with another one. The new part may again resemble the one that was broken. If the required option could not be found on sale, then you will have to change the drain mechanism itself. To carry out the operation of replacing the button, you need to remove it from the outlet valve and install a new device. All work must be carried out with sufficient care to avoid accidentally breaking other fittings into the tank.

The button on the mechanism gets stuck, fails, or doesn’t work at all, which can cause a lot of problems when using the toilet. It is not good for you to put on such an important diet for a long time, but rather you can try to adjust the system, repair or replace the part yourself. If you don’t go into self-tightening, it’s better to call the doctor to resolve the problem that has been solved.

Removing the toilet cistern cover: video

Anton Tsugunov

Reading hour: 4 hours

Plumbing equipment is subject to intensive use and often goes wrong. If the toilet tank is constantly leaking, it causes a lot of water build-up due to over-consumption of water. Calling the masters through the outlet of the device is not entirely effective, since the repair largely lies in the tuned mechanism of the tank. In order to understand how to please the toilet, first of all you need to know how to control the authorities. Let's figure out how to independently repair the toilet tank using a button.

Attach the toilet

The toilet warehouse includes the following elements:

1. The toilet bowl is connected to a sewer pipe with a sealed cuff.
2. A cistern with fittings that ensures it is filled with water and waste.

A water supply hose is connected to the tank. According to the design, the veins are connected from the side and from the bottom. The bowl and tank are connected one by one using additional bolts and reinforcement.

Accessories to add:

• trigger mechanism with traction button;
• shut-off device (inlet valve), connected to the floater;
• hermetically sealed gum gaskets.

The principle of a toilet robot with a button

The toilet tank has a button and a water seal, which is filled with a portion of water that is supplied to the bowl when the shutter is opened. The media control is indicated by the button that needs to be pressed. When the valve opens, the water flows down under the damp water, washing the bowl. After the tank is empty, the shut-off valve at the inlet is opened, the tank is filled with an incremental portion until the singing level is adjusted using an additional floater. Access to the mechanism is ensured by opening the top cover of the tank.

Preparation before repair

Before you clean up the dirty toilet tank, you need to open it. You won't have access until it's too hot to remove the cover. There are a lot of modifications where you can attach additional rings around the button. You need to press on this ring and turn it against the year arrow. The ring may not turn after heavy use. Then apply a drop of olive oil at the place of fastening. After the hoop has turned, twist it, and then release the button from the plastic pins and remove the lid.

Do-it-yourself methods for repairing the tank mechanism

Through the upper opening of the tank you can see the entire mechanism of the filling valve. The following malfunctions may occur:

1. The tank is constantly leaking.
2. Resistant to the pressure of water at the inlet.
3. The unkerated mechanism is working.

The causes of these malfunctions can be varied, and they include the method of repairing the toilet cistern.

• The korok (pear) rests gently until the opening opens. If there is nothing left, you need to add high quality plumbing. The possibility of repair can be checked by pressing the rod with slight force. If the water is not leaking, the plug can be slightly tightened with additional tape or the stem can be tightened. It is also necessary to periodically clean the reservoir from rust and salts, as the seal is destroyed and the liquid constantly leaks from the bowl.
• The regulator does not cut off the water supply. In this case, the tank will not overflow due to the presence of the overflow tube. The suitability of the skin element of the device is checked: float, inlet valve, fastener, rod. Parts that have gone wrong are replaced or the floater fastening is simply tightened.
• Flow from the tank to the area. This may cause a crack or damage the seal of the gaskets. Particular attention should be paid to the connection between the flow tank and the bowl. It needs to be tightened, but if this does not help, the humic gasket is replaced. Another cause of leakage may be wear of the cuff in the jointed drainage bowl with the sewer pipe. Make sure to change the new one by cleaning the joint from congestion and sealing the surface with sealant.
• Weak pressure through the intake valve. Call and be aware that you will laugh. This can be avoided by cleaning or installing a filter in front of it.

Replacing the intake valve

Before repairing the toilet, turn off the water supply tap. It is connected to the pipeline from the riser. Afterwards the flexible hose from the inlet mechanism is unscrewed. It is easy to get out if you loosen the fastening. In its place, a new series of repairs is being installed. Folding is carried out in turn order. The plastic thread is not reinforced, and a fluoroplastic stitch is wound onto the brass thread.

Replacing the drain valve

The main reason is wear of the seal ring under the valve. To replace it, you need to remove the fittings and install a new gasket. After this, collection is carried out at the gate.

Use the water release button to carefully press the water release button and press on it without any sharp force.

Regulating the level of water in the tank

The flow of water can be easily adjusted with a hand. For this purpose the float is installed in the singing position.

The optimal level is considered if the water supply to the tank has stopped, and a few centimeters are missing from the top edge.

The method of regulation lies in the design of the fittings. The simplest one is the fitting of a metal rod. If the floater is pressed horizontally directly from the plastic, it must be fixed behind additional fastening elements in the original position. When arranged vertically, it is moved with an adjusting screw.

When choosing a filling level, do not forget about the overflow tube. The upper edge is liable to contain a couple of centimeters more than the amount of water in the filled container. If the filling is lower, water will gradually flow into the bowl through the overflow.

Troubleshooting the tank

The tank can let water through the cracks that appeared in the new one. Those same cups are drained. In this case, there is no need to talk about how to repair a dirty tank or bowl: the entire toilet needs to be replaced. A small crack at the top of the ceramic beads can be sealed. To ensure that it does not expand further and that water does not leak out too much, harden it at the ends and sand it down with an emery paper throughout. The work is finished carefully.

The surface is defatted, and the gap is filled with epoxy resin. After hardening, grind the seam.

Repair of a built-in tank (with installation)

The distance to the tank mechanism, installed behind the false wall, is easier. First of all, we should buy a device with high reliability, which rarely requires repair. There are inspection hatches at the wall, through which you can remove the tank and replace the gaskets if the seal has been damaged. It is impossible to repair drain fittings with your own hands due to the folding nature of the structure.

Before entering the tank, a coarse filter is installed, which catches solid particles through which most taps leak.

How to choose the right plumbing fixtures?

When you select a toilet, you will be under pressure.

• Mounting method: monoblocks, compact and separate toilets. Choose to pay attention to the dimensions of the space, the design and the ease of maintenance of the tank.
• Accessories. Most parts that require little value and reliability are made from plastic.
• The presence of positive effects, the source of the virus, the presence of the guarantee and certificate.

The most common problem in sanitary facilities is the malfunction of toilet tanks. The entry of the buttons, more filling of the storage tank, a continuous flow of water from the overfilled tank. There are no malfunctions.

These situations may arise from different drives. To reveal the true cause of the skin rash, it is necessary to remove the cover. After identifying the nature of the problem, you can carry out a simple repair of the toilet cistern using a button with a hand, without having to resort to the help of plumbers.

We twist the button with an angry hand, wrapping it against the year arrow. No specific tools are required for this operation. We pull the button and carefully remove the cover.

The push-button mechanism for pouring into the toilet tank is located in the center. Its main function is to serve as an element for fixing the stable position of the lid

In the middle of the drain tank there are two mechanisms, in parts of which there may be a malfunction that causes leakage:

• the mechanism is angry;
• a shut-off valve that allows water to flow from the water supply into the tank.

We carefully look at the mechanism of the water, assessing the height of the water level. If the water is in an overflow area, make sure that it does not touch the shut-off device.

The water in this place is mostly available for swimming, and then reaches the sewer canal, which flows into the sewerage system.

If the water flow is at the adjusted height in the locking device, leakage is caused by a malfunction of the valve in the valve mechanism. There are two main reasons.

Repair of the valve locking mechanism

Water often passes through the overflow device, so the drain valve remains in the operating position, and the problem lies in the constipation mechanism. Vibratingly angry, releasing water content. We close the water supply tap to the system. We remove the attachment of the evaporation mechanism by turning it slightly against the directional arrow. The part is pulled out from the container, we examine the body of the humic ring of the drainage mechanism, which is the shut-off valve of the drain mechanism. Let's reconfigure our integrity. We add kill.

If this is not the case, then we remove the ring and rearrange it with the reverse side, thereby ensuring a tighter fit of the gum to the surface of the bottom of the container. You can install a new faucet ring in the bathroom at a plumbing supply store.

Another problem: the formation of mucus, the accumulation of mucus on the surface of the shut-off valve, which destroys the tightness of the system. You can use this method to clean the parts by cleaning them. Rearranging the hoop is very easy. Remove the plastic lock washer. Take the humic part, rinse thoroughly, then turn it over with your feet and press it with a washer placed on the wrong place.

Schematic representation of two methods of supplying water to the toilet tank, which shows the constructive functionality of the fitting assembly units

We turn on the water supply system and the locking mechanism. Є tanks with bottom water supply and from the top, dispensed at the tank station. The inlet hose is attached and the valve is located to the animal. The type of connection does not play an important role, since the malfunction is directly related to the shut-off valve assembly. Under the valve, there may be pressure from the water supply system, which destroys the strength of the sealing ring.

Moreover, the valve itself may become deformed during regular use. The manifestation of which is a specific marking that appears on the lips of the holder. Due to such damage, it is no longer possible to obtain sufficient water from the water supply system.

Type of a torn valve rubber that will have to be replaced with a new part, bought in a store or made with your own hands from the same materials

• There is a mechanism that controls the supply of water to the tank. For this, loosen a large nut, wrap it against the anniversary arrow.
• It is necessary to remove devices from the tank, adding time to kill.
• We see a membrane that serves to reduce the pressure of water coming out of the system.
• Wash the ring of the pump and pull it out at the same time as the membrane from the inlet pipe.
• Next we proceed to disassemble the body of the shut-off valve, which was placed at each hour.
• We click the float in front and pull it.
• Then we remove the floater body itself, remove the tab, which fixes the position of the part in the tank, and remove it.
• Then we decide where to install the valve. To do this, we take a twist, put it on both sides, and twist the valve “on itself.”
• You can see the socket from which the valve was pulled, and also a small opening that needs to be tightly closed if the tank has fresh water.
• The deformed valve looks like a miniature gum, in the center of which there is a notch, whose size corresponds to the size of the opening that lets water into the tank.
• During the first repair, this gum-valve is turned over to the other side, which is smooth and even.
• When re-repairing, the rubber valve is cut with a standard stationery knife strictly in the middle. First the deformed part is placed in the nest, and then the other - with the smooth cut side facing up. In this manner, one valve can be turned three times, first turning the parts with a smooth surface until the opening opens, through which the tank is filled with water.
• You can replace the valve with an additional part made from polystyrene foam.
• We install the valve back in place in the socket, securing it in its position until it locks.
• We collect all the parts from the gate sequence: body, floater, installation on the pipe, secured to the device with a swivel nut.
• The valve in the raised position must hang the float 1 cm further behind the body in which it is located. The axis is in this position and you need to fix the position of the float by clicking the locking mechanism.
• We install a part in place that closes the leakage hole in the tank. With a sharp movement behind the anniversary arrow, we fix them in the right place. It is not typical to hear a clack sound.

We open the tap and start the water supply system. We follow the process of refilling the tank, taking into account the time of repair of the shut-off valve that was repaired. As soon as the water overflowed into the body of the float and raised it by 1 cm, the water supply to the tank stopped. We place the cap in place and fix it with the water release button, twisting it along the separate part of the drainage device until it stops, straight ahead with the direction of the year arrow. The result of the implementation of repair work is amazing. In the toilet, there is no need to avoid uncontrolled flow of water from the toilet tank. The water dispenser has stopped, confirming that water is being withdrawn from the system. It is important to control the process so that we can again achieve a positive result in the repair. The fault was resolved with one’s own hands. Money was saved because it became necessary to purchase a new valve mechanism and shut-off valve.

More details about repairing the flush mechanism of the toilet tank with a button can be found in the video.

Reduced leakage between the toilet tank and bowl

As soon as I can see water flowing from the bottom of the tank, there is talk about the leakage of the drain opening. The tightness of the connection between the parts of this structure is ensured by a gasket, which can be round or in another shape, placed firmly under the model. The situation with water leaks can be corrected simply by replacing the drain. Before going to the store, you need to remove the waste tank and remove the gum from the drain. It is best to show the removed part to the sellers to help them choose a replacement.

Sometimes it would be better not to buy such a very poor person, as he will get out of trouble again in a dozen hours. Virobniks produce stained parts from materials that contain large quantities of germs. The very same gumki uglyuvachiv and varto brothers. Having installed the add-on outlet in place of the old gasket, install the tank in the reverse order. Much has already been said about how to install the flush mechanism and inlet valve, as well as how to secure the tank to the toilet bowl.

Replacing the seal gasket with a good assembly that you can assemble with your own hands in your home using a handy tool.

Fully filled water tank

The low flow rate of water into the toilet tank is due to clogged filters. Repairs are carried out in the following order:

• by turning the faucet handle, we turn off the water that goes into the toilet from the cold water supply system;
• Screw on the bend leading from the water supply valve to the toilet, which opens either from the bottom or from the side, lying in line with the model of the plumbing faucet;
• at the noticed hose, we notice and check the pressure of the water at the water supply, lowering the end of the pipe line into the toilet, as it drains at the end of the day;
• Otherwise, you can use a five-liter plastic bowl or canister for evil water;
• turn down the tap, if the pressure is good, then proceed until the water supply valve is cleared from the sediment that has accumulated;
• This part is not available on all toilet models, if it is, it will require cleaning;
• we pull the filter out of the valve using additional pliers, pushing the part into a small space;
• The resulting grid is washed in the sink under a stream of clean water to remove solid particles that have become clogged and to remove mucus that has accumulated;
• Then install the filter in place, turn on the water and see that the problem has been resolved.

View of a clogged valve pulled out of the water inlet mechanism at the drainage tank. After cleaning the part, water flows into the toilet bowl with greater fluidity

If the problem is not resolved after washing the filter and hose, it means that we wash the entire water supply valve from the tank, first removing the toilet lid.

After all the descriptions, the problem appears to be real. An algorithm for repairing a toilet tank with a button to completely fill it with water is shown in the video.

Replacing the fittings of the septic tank

The old fittings in the old toilet cistern are being dismantled, as they have become unusable, and a new water supply system is being installed. We buy universal fittings that will fit all toilet tanks. For the economical use of water, a double-button flushing mechanism is used, which allows you to change the water in a stale state in view of the lifestyle of the people who wash themselves.

This kind of fittings has a vikorystovaya:

• outside push-button mechanism;
• manually adjusting the volume of small and large water;
• the height of the tank is adjusted to the height of the flush mechanism;
• changing the draft by reinstalling the valve in one of the openings;
• I will tighten the nut with a gum gasket;
• a valve that closes the drain on the toilet bowl.

A mechanism for economical drainage of water from the tank, which operates using two keys, the activation of which is indicated by a blue or white pin at the moment of pressing one of the buttons

We are in the process of replacing the old fittings. For this purpose, we unscrew the button that removes the toilet lid and removes it from the socket. Let's take a look at the critter. We shut off the water supply to the tank. A flexible hose is visible. Unscrew the screws to press the toilet tank onto the toilet bowl. Remove the tank and place it on the lid of the seat so that it flips up. I'll remove the rubber gasket and then tighten the plastic nut with my hands. Then the old cranking mechanism is pulled out.

Next, we install a new flushing mechanism, having first removed the humic gorge from the new one and unscrewed the clamped fastening nut. After inserting the evaporation mechanism into the opening of the tank, its position is fixed with the removed parts. When installing the tank on the toilet, do not forget about the cradle ring, which is placed on top of the plastic nut. Then the tank is inserted into a special opening in the bowl, with wing nuts screwed onto them from below. The fastening elements are tightened evenly on both sides, preventing distortion of the part that is being installed. If necessary, replace the fastening elements with new parts with reinforced gaskets.

With the help of two fastening elements, the tank is securely attached to the toilet. At the bottom of the bowl, tighten the ram nuts onto the screws, and tighten thin gaskets in front

When connecting the water hose to the side inlet valve, the part in the middle of the tank must be rotated. We tighten the nut with a special wrench or pliers. We install the tank cap and tighten the button. If necessary, adjust the stand and move it.

The double button has two lines, which activate the required flushing mechanism. The length of the stitches reaches 10 cm. They are shortened to the required length, depending on the height of the tank. Screw the button. Insert the lid into the middle and secure the position of the button with a nut. Place the cap on the tank. Turn on the water supply. Press a small part of the button to dispense about 2 liters of water. Press the larger part of the button and get about six liters of water.

Login and the button is stuck: what to do?

Before repairing problems with a tank that is writhing, you can add sticky or stuck buttons. So when you press the button, you release it, and it gets lost in the socket, so the anger is not applied. You have to press the button mechanism several times to turn the button to the release position. The problem arises from the process of cleaning the buttons themselves from dirt and debris. A number of different cleaning methods when maintaining the hygiene of the buttons will allow these problems to arise again and again. They simply pour a small amount of washing agent directly into the push-button mechanism. When the special powers are infused, the entire block is dismantled, and sticky buttons are not restored.

When the button on the toilet tank closes, it results in a large waste of water, which is unacceptably expensive for the family budget.

As you know, it is much more possible to carry out independent toilet tank repairs with a button. By spending a few hours learning how to install the robotic mechanism of the fittings, you will be able to operate the drainage tank without any outside help. Of course, since plumbing jobs do not bring you the satisfaction you need, they will turn to professional masters who will deal with any malfunction of the tank and toilet in the treatment of illness. It is enough for the right specialists to look around the toilet at one glance to understand the nature of the problem. To troubleshoot problems with plumbers, take care of everything you need to do first.

Sanvuzol, which functions, is what is needed for comfortable living in a cabin or apartment.

It is extremely unacceptable if the toilet breaks. Even though the water is constantly leaking, it is still expensive. Payment for water is required by the physician.

It won't be long before the vibration delays replacement.

With any mechanical control system, repairs to the toilet tank can be carried out independently. Before troubleshooting, the trace must be taken to determine the cause of the breakdown.

Vidi

Zlivnih tanks

The devices are enhanced with several structural parts.

Storm mechanisms

1. Vazhelevy. It is installed in the surrounding chambers, where the tank can be expanded, like an animal, and from below. Water pours out of the toilet bowl when it is important.
2. Pneumatic. Water flows out after pressing the button of the pneumatic chamber.
3. Shtokovy. The rod rises up, the mechanism creates a passage for the middle. The stock is in front of the lid of the tank.
4. Push-button. The drainage mechanism operates by pressing a button on the tank's lid. Models are released from two buttons for anger. When one button is pressed, half of the middle is released, and when another button is pressed, all accumulation is released.

The reservoir is regularly filled to the required level, and after water is supplied it is automatically added.

Valves

In addition to how the water is supplied to the tank, determine the type of valve.

Systems without a floater are either bottom or bottom.

Such designs are equipped with a special chamber. The system works based on Archimedes' law. The tank is filled with water and the chamber is rotated, which initiates the supply of liquid.

The tank valve with a float is produced in two versions of membrane and piston. For the skin version, the tank is filled when you fill up a small amount of water.

The pouring mechanism can be made up of parts that are interchangeable, or as one set.

Connection type

• Bichny. The tank is equipped with two openings on the skin side. A flexible hose is brought to one wall, and a plug is placed on the other hole. The disadvantages of such a liner are the above-ground noise when drawing water and the lack of aesthetics.
• Lower type of connection. The hose for the set of fluids is mounted on the bottom of the tank. The reserve is practically noiseless.

One model can be supplied with two connection types. Three mechanisms are present in the skin tank.

• Locked or the burning mechanism. Regulates water flow, controls overflow.
• Pouring valve. The valve for filling the tank can be extended either from the side or from the bottom. The float will become known to the beast first.
• Vlashtuvannya is angry I'll overflow.

The main failures of the toilet tank are always associated with these three devices.

Before you go home. Mechanical damage to the tank itself (including cracks) cannot be repaired. The virus will have to be replaced.

Malfunctions of the drain tank

Water from the tank is leaking

If there is moisture behind the toilet or a tank of clean water, this means that the gasket installed between the tank and the toilet has become unusable and requires replacement.

To make a replacement, you need to first add a ring to the driver. Then follow the instructions to resolve the problem.

• Shut off the water supply to the toilet.
• Add water from the tank
• Remove the water supply hose
• Remove the tank from the lid
• Dismantuvati zlivny kopochuvach
• Replace gasket
• Make a collection at the gate sequence.

To improve sealing, you can apply waterproof silicone.

Water is not delivered to residents

There are many reasons for this malfunction.

As soon as the water begins to flow smoothly, we install a valve, a valve and a float at the exit position. Sometimes the valve cannot be cleaned, so replace it.

Water is steadily flowing into the bowl

• The reason is the incorrect swimming robot. The water does not stop the flow of the middle and flows steadily through the overflow.
• It is important to change the situation on an unforeseen basis
• Broken water supply valve

As soon as the design of the sunglass tank begins to reveal a malfunction of the float track. It is possible that the wine has burst, the water has leaked and the wine can no longer rise and turn on the water supply. If there is a reason why the part needs to be replaced.

Modern toilets have a spout and there is no float in them. This part cannot be repaired, it is simply replaced with a new one.

Water can leak through a broken inlet valve.

• It is important to check the valve operation for signs of mechanical damage.
• We open the tank and marvel at how the water fills up
• It is important to turn the track around. The valve is blocked. Once it is obvious, it is important to straighten it.
• It is important not to break in. It became jammed. We are looking forward to replacing the node.

A breakdown of the intake valve itself requires replacement. It is necessary to dismantle the part, buy a similar one from the store and install it in the system.

The internal fittings came out well

Sometimes there are a number of malfunctions to watch out for at the same time. Next, replace the entire system with evil.

Replacing the drain mechanism from the bottom set of water.

• We close the tap to supply water to the tank, releasing it from the middle.
• Let's take the lid off.
• Screw-on flexible hose
• The top of the column is rotatable and removable
• We dismantle the tank by first unscrewing the bolts and tightening them.
• We dismantle the inlet valve and the release button
• The old mechanism is moving
• We are installing new fittings.
• We place the tank near the weekend position.

Loud noise when filling with water

This fact does not mean injustice. Make noise from the tanks at the top.

Models are available where the opening diameter can be adjusted. You can’t reduce the noise at all, but just reduce the noise.

Whenever it is possible to make adjustments, there is an option for modification.

Take a humic tube with an inlet opening diameter of up to 30 cm.

The tube is placed around the inlet port, fixed, and finally dropped to the bottom of the tank.

This stops the water falling from the height, the filling starts from the bottom, and the noise disappears.

A button or two buttons are stuck

The model of the toilet with two buttons is very hot. In any mode, the buttons are stuck. To carry out repairs, you need to remove the cover.

The nuts are first tightened, then the buttons are pressed, after which you can open the tank. Pressing the buttons at the same time also helps them stay in place.

If the manipulation did not work, turn the button shaft over. Sometimes you'll laugh. After cleaning the shaft, repeat the inspection. If the result fails, a new part must be installed.

The vuzol is dismantled, the same is bought and installed.

Pouches

If the track malfunctions, don’t always buy a new one; it’s often very easy to do the repair yourself.

For comfortable living, people need water supply and lighting in the premises, as well as plumbing fixtures that function properly, connected to the sewer system. One of the most in-demand plumbing fixtures is the toilet and cistern. Small tanks are most often equipped with buttons for smooth flushing of water into the toilet. The toilet tank button becomes useless over time or requires repairs. How to earn money, read further.

Attachment of the tank with a button

The drain tank contains a container where water for drainage is saved. For robots, the tank is equipped with elements. To flush the toilet tank with a button:

1. evil mechanism. The device connected to the button indicates that the water is out of water. The lower part of the flush mechanism is equipped with a sealed membrane that prevents water from leaking into the toilet;

The mechanism can be equipped with:

• single-mode button. The water is released when the button is pressed. In this case, the entire area from the tank goes into the toilet;

• press button. The button with a number of operating modes is divided into two parts: small and large. When the smallest part is removed from the toilet, half of the waste goes into the tank. When draining the water, it is important that the water buttons are fully engaged.

The use of a button with two robotic modes allows you to protect cold water.

1. filling valve, which indicates the collection of water into the tank. The filling mechanism is equipped with a floater, which regulates the flow of water in the tank. The mechanism can be:
   • high water supply. It is most often found in tanks of Russian plant production. By changing the mechanism, the noise is made during the collection of water;

• lower water supply. When installing the valve from the bottom connection, it is important to achieve complete tightness of the connection.

All fittings installed in are interconnected. When the button is pressed, water is released. When this happens, the float of the filling valve sinks to the bottom of the container and opens the inlet valve. Water begins to flow from the water supply and raise the float to the set level. When the reservoir becomes full, the inlet valve will automatically close.

Button repair

The fittings of the tank may become unsuitable for the following reasons:

• The discovery of unclear mechanisms. Professional plumbers recommend installing tank fittings manufactured by such companies as Cersanit, Vidima, Jika;
• natural wear. Whether the device is used to pay for the song, the number of rocks is different or the number of cycles of change;
• mechanical damage. Careless use can lead to breakdown.

Button malfunctions and ways to fix them

The most common problems with the push-button mechanism are:

• “sticky” button, so that the water can be washed only after pressing the drain device many times;
• If the button falls through, the button mechanism drops into the tank’s capacity.

Usunennya sticky

If water washing is carried out after pressing the button many times, then the malfunction is related to the rod that connects the trigger device and the flush mechanism.

To resolve the problem you must:

1. shut off the water supply to the tank;
2. remove the lid of the tank. For this purpose, the inner part of the button is pressed into the first drawer, and then the locking ring, located on the button, is twisted against the year arrow and is pulled out;

1. the button is removed;

1. take care of rod repair;
2. The system is based on the reverse order.

The rod is made of plastic. Therefore, repairs most often involve completely replacing the device. To quickly eliminate the malfunction, the rod can be replaced with a dart.

Usunennya failure

If the toilet tank flush button fails, the cause of the breakdown may be:

• Incorrect adjustment of the evil device (insufficient vibranium, height of button adjustment);
• comes out of the spring fret, which turns the button at the release position. The problem appears to be replacing the spring.

To adjust the evil mechanism, you need:

1. cut off the water supply to the reservoir and completely anger the country that has been deprived;
2. remove the flushing mechanism (the whole thing turns to the left until it clicks);
3. press the fasteners to secure the bottle;
4. increase the height;

1. install the valve and cap;
2. Check the corrected problem and repeat the procedure if necessary.

How to regulate the evil mechanism is shown in the video.

Replacing the button

If these actions do not help eliminate the malfunction of the reservoir release mechanism, you will need to replace the release button. You can carry out the work in the following way:

1. understand the button behind the diagram of the device described in the report;
2. Press the button on the outlet valve;
3. install a new device.

The new toilet button is likely to result in a broken device. Otherwise, the drain valve will need to be replaced.

All work to troubleshoot buttons must be performed very carefully so as not to damage other elements of the fittings. If you don’t have to go out on your own to fix the breakdown, you will need to contact the fakivtsi for help.