Close supervision of plastic windows is the most affordable procedure that allows you to increase their service life. With the right approach, you can reach 50 points.

There are a lot of aspects to look at, and one of the most important ones is the fact that the elements are mixed. Leave it there to ensure that the fittings last a long time.

What you need is butter

During heavy use, the internal mechanisms consume a lot of saw blades and saws from the street. This is especially true for apartments that are expensive. The obstruction is in the middle, which complicates the work of mechanisms and fittings during opening/closing.

Old butter loses its strength and develops abrasive powers, which contributes to the rapid deterioration of important parts. This can cause them to become unattainable. Repairing fittings costs a lot of money, so prevention seems to be a more reasonable method.

The first sign of the need to change the butter is the appearance of cracking, creaking and clattering sounds when the chair is opened.

Virobniks offer a guarantee for accessories from 2 to 5 years. This term, as a rule, is based on factory oil (although it still remains in the minds of operation). After completion, it is necessary to carry out an update. Experts should work at least once per river (the recommended time for rock is mid-spring). Residents of great places have to work more often. If the window faces the road, the fittings become difficult as often as possible.

How to properly coat PVC window

It’s easy to grease the windows yourself - it’s a problem for any person. This procedure is carried out as follows:

1. We buy oilseed material. You can quickly use universal WD-40 or a special method.
2. We twist up the chairs and with a gancher we can see the whole pond. Important stains can be removed with a stiff sponge or a special brush (not rough, as splinters can damage the surface).
3. Clean the brackets thoroughly and put in all the metal fittings.
4. For essential access, use a tubular spout that comes with WD 40.
5. If you use vicoristic ointment in the bottle, then apply 2-3 drops of liquid to the skin element.

This is how you apply oil on plastic windows with your own hands. It is strongly not recommended to experiment with methods. Sonyashnikov oil, Vaseline and other everyday words are not suitable for this task.

Maintenance of plastic windows includes cleaning. To achieve the best results, remember these rules:

• To clean the profile, you cannot use abrasive or powdery substances. It is also possible to chop the surface with a short brush to allow the wood to penetrate into the structure of the frames.
• Cleaning agents based on acids, detergents or acetone are protected. This is to develop a stabilizing ball, and this will lead to a change in color and further damage. It’s better to use everyday words that are in the kitchen (for example, washing dishes).
• To clean the warehouse, use items that are not intended for your own benefit. A simple sponge can remove dirt.
• At least 2 times a day, clean the humic drains with the help of water and household products (milo, powder, Comet, etc.).

Five simple rules for observation

Proper prevention of plastic windows to prolong life. To achieve the maximum operating period, it is necessary to adhere to the following recommendations:

• Check your rooms regularly. The PVC profile has a high airtightness, which practically prevents any air from entering the premises from the street. Therefore, in this way, vloga systematically accumulates. It appears on cold plots as condensation and fogging appear. In times of severe frost, ice may appear. To prevent this from happening, it is necessary to reduce moisture in the area through systematic ventilation.

Important! If the glass package is stained in the middle (between the edges) - it is faulty. Get a cost-free replacement from the seller this time.

• Clean the water supply openings. You can find them by opening a chair or standing on the balcony. Stinks tend to accumulate and condensate. Most often they are covered with visors so that they do not lose the moisture of the doctor. Bags of feathery three-fourths of the surfaces of the surface should be quilted behind these openings at least 3 times per river and, if necessary, remove the debris from them.
• Check the frame of the rukhomikh designs. Ease of movement is an indicator of a normal chair. The chairs are liable to open and close.
• Change the humic dampers. The warranty period for these items is from 1 to 5 years. After the end of the term, it is better to make a replacement. The cost of this part is low - from 25 to 75 rubles per meter. Once in a while, it is recommended to coat them with silicone or glycerin - this way will extend the operational period.
• Follow the handle position and tighten the fixing bolts regularly. To gain access to them, you need to remove the plastic cover. If children live in the cabin, it is better to install a handle that is removed.

Transferred to winter (summer) mode

It is necessary that the profile functions in normal mode and that the temperature in the room is maintained at a comfortable temperature. Budget models rarely support this function; it is typical for the middle and high price segment.

To change the mode, do the following:

• The rollers are known to be pressed (their diameter ranges from 5-8 mm). There is a rotten smell on the end of the chairs near the place, reaching up to the frame. There may be a handful of such videos, but you need to know everything.
• We joke about them. If the winter mode is set, it will be straightened in the middle of the area. If you marvel at the street, then there is a summer regime.
• Next, you need to change the tension mode of the roller on yourself, after which you change the position of the rizik.
• We install it in the exit position.

This procedure needs to be done using rollers. Some models may require a hexagon to turn.

Regardless of the warranty terms that are given for their products, plastic window manufacturers, fastening units, locking mechanisms, hummocks and fittings require periodic maintenance. It should be properly washed, cleaned and adjusted.

These jobs do not require any special skills and can generally be used to manage apartments and cabins on their own. How to coat PVC windows and balcony doors and carry out technical maintenance of window elements and assemblies will be discussed below.

What you need is oil for plastic windows

Everyone knows that rusty parts and components of mechanisms that rub work much better due to the presence of oil. It paints the forging of surrounding parts, protects metal elements from corrosion and reduces their wear.

The skin of the window chairs should be used until the saw settles on the parts and surfaces of the window. The process of obstruction is gradually advancing, as a result of which the locking mechanisms and fittings begin to work harder, complicating the opening-closing process. If you don't get used to it for three hours, work units may experience an abrasive effect, which can lead to a repeated waste of expensive elements.

Most manufacturers do not supply other parts and spare parts to other manufacturers. Therefore, the wear of locking elements and fittings can lead to complete replacement of the entire window unit. This results in much larger financial expenses, lower maintenance and grease.

Among the main signs of the importance of ointment and maintenance of windows, which have not been carried out for a long time, can be called:

• the appearance of third-party sounds when opening and turning the window chair;
• the presence of a metal saw at the nodes rubbing elements together;
• decreased elasticity and sticking of humic acids;
• difficulty turning the handles when opening and closing the window.

Cleaning, lubricating and adjusting all components and parts will help you get rid of everything.

Frequency of oil treatment

Periodic maintenance of plastic windows with applied oil must be removed at least once per river. It is best to work during the spring season after winter operation. In addition, due to the frequency of the oil, it is necessary to take care:

• visibility of highways, Maidan squares, industrial enterprises and other lumber-producing objects;
• the natural and climatic minds of the sun are constantly growing;
• the frequency and severity of the opening of the windows during the warm period of time.

Since the influx of the above-mentioned factors is great, it is necessary to wash plastic windows more often. For example, spring and spring. It is recommended to remove humic acids in case of skin irritation, the fragments of mild wounds that are vicorized are washed away in front of the coating.

The main place is covered.

The correct choice of oil depends on the materials used for the manufacture of window parts and their use. Therefore, for processing various structural elements, various oil materials are used.

Locking mechanisms

• special oils for plastic windows, made on a silicone base and packaged in aerosol cans or tubes;
• universal silicone stocks, which can be purchased from auto parts stores;
• machine oil for sewing machines;
• all types of non-synthetic and synthetic oils, neutral to gum and plastics.

• wild and animal fats;
• Vaseline;
• make arrangements for keeping an eye on everything;
• margarine and butter.

All these words are subject to heavy sedimentation, thicken in fresh air and lose oil at low temperatures.

Gumovy gorge

All other materials are used for vicorization of thickening gums. In response to the need to lubricate the gums on plastic windows, fakhivtsi talk about the possibility of stagnation of current professional and daily duties:

• technical silicone - the most intense and inexpensive product without color or odor, which retains its power in the range from -40 ° C to +150 ° C;
• special oil for damaged windows manufactured by the German company Fenosol;
• oils for gum materials, which are recommended and produced by Vikon manufacturers;
• Vaseline, for use at ambient temperatures not lower than -25°C and not higher than +27°C.

Essential glycerin will soften the gum well, preventing it from being dissolved in water, and it will limit the area of ​​solidification for external elements. Well, he admits it, but for the reason of increasing the number of periodic maintenance.

It is not recommended to use WD-40, the fragments of its chemical warehouse will be secreted and the infusion of humic acid will not be visible. However, there is information that hardened rubber pieces harden, become crunchy, and crumble over time when WD-40 is injected many times.

Mastila for accessories

The answer to how to coat the fittings of plastic windows is simple. For this purpose, use the same materials as for locking mechanisms (behind a bit of oil for sewing machines). Then spindle oil is allowed.

More correct visualization of the process

All manufacturers will indicate the location directly on the products or in the accompanying documentation when selling. For the sake of completeness of this information, a diagram of the construction of the widest window structures is provided below.

Technical maintenance of a plastic window begins with the cleaning of its elements from the saw, wood and excess old oil material. To do this, you need to open the chairs, wipe them with ganchers and rinse with warm water. After this, carefully wipe all the parts and surfaces with a dry serving cloth or cloth. Dry the area thoroughly, ventilate it and then proceed before applying the ointment.

The lubricant of locking mechanisms and fittings is sealed.

When preparing the window before coating the metal elements, it is not recommended to immobilize active parts and components. It is best to stop the robot in windless, warm weather, since the wind can bring debris, soot and other obstructive speeches.

Apply the ointment most handily using a syringe. From the tube of the bottle to anoint one point, it is enough to take 2-3 drops of material. The use of aerosol cans leads to obvious over-consumption of oil and its dispersion on the land plots. The processing of all nodes is carried out at one time.

After applying the mastile material, the chairs must be opened and closed several times, moving them near the skin working area. As a result, the oil will be evenly distributed over the entire surface of metal parts and assemblies.

Gumovy gorge

To clean the surface of the rubber pads, you can use a warm mildew, a sponge or a soft plasterboard. After washing the gum, you need to wipe it dry and ventilate it. In double-jawed humic profiles, the inner surface is lubricated and, after all, the outer surface.

To apply pourable ointments, use a cotton or gauze swab, aerosol solutions are simply filed, and thick materials can be smeared with a finger or a pen.

To properly monitor the gum deposits, transfer the sample at least twice per river.

At the end

Proper maintenance of plastic windows using the proper materials will improve the terms of their operation. Therefore, prevention must be carried out regularly, at least once a day for metal elements and skin fluids for humic germs.

The correct operation of PVC window structures requires regular and proper supervision of them. After a period of wear and tear, the mechanisms become blurred. How to coat the plastic windows to ensure continued service life and ensure comfortable operation.

While we are cleaning the house, we don’t forget about cleaning the bins with a saw and a board. However, not everyone is concerned about the fact that monitoring windows is not limited by external procedures. Internal mechanisms and fittings now begin to function incorrectly, and this is due to a decrease in the strength of factory oil materials. Bring dryness to the accumulation of metal particles. Malfunctions can be signaled by squeaks, squeaks, clangs, or jammed doors. When purchasing new products, the manufacturer provides a guarantee of 4-5 years. This very term of reference belongs to factory oil. Unfortunately, not all sellers inform buyers about the need to carry out preventive measures, and the situation can reach critical moments. If you don’t react to a problem quickly, you may end up confused. Mastila for plastic windows is made for the following purposes:

• reduces the rate of friction of metal elements, increasing their wear resistance;
• makes it easier to close/open the chair;
• protects from irzhi, creating a dry ball on metal;
• The humic cushion preserves elasticity, does not stretch and ensures the necessary firmness of the chair.

Mastil is applied to all elements that crumble and rub, and those that have cracks on frames and chairs. On some models of Vikon PVC, you can apply regular marking with oil. In this way, the growers indicate which elements themselves require oil.

The situation becomes more complicated because the structures installed with the first PVC windows are subject to wear and tear on fittings and fasteners, the replacement of which is important to know immediately. Therefore, the wear and tear of one or another element must be carried out before the internal mechanism or the entire unit is completely replaced.

How to lubricate plastic windows, types of methods

Not all conditions are suitable for vicon oil. On sale you can find ready-made kits for monitoring plastic blocks, but their functionality is not accessible to everyone. It’s better to buy everything neatly, especially since half of these sets may not be needed.

How to lubricate the mechanism of plastic windows

The optimal choice for lining the window mechanisms would be the following:

• Silicone-based products are manufactured specifically for window mechanisms. When they are applied to the metal surface, a thin, stable melt is formed. Mastilo is dispensed in tubes or sprays. There are options available;
• Universal lubricant, which includes the same silicone. It is identical in a special way, but can be stuck together like on the windows. The consumption of koshti is minimal, so one tube will last for a long time;
• lubricant for sewing machines or bicycles. It is similar to machine oil, but very clean. It’s easy to work with and stays on the surface for a long time;
• mineral and synthetic oils. For smut, select products that do not contain acids, aggressive reagents or abrasives.

It is not recommended to use oils such as vegetable fats, Vaseline, or anything for vutta. This is due to the fact that the growing oils deprive the mechanisms of the melt, as it takes almost two years to dry. Over the course of an hour, a large amount of saw blade accumulates on it, which complicates the work of the accessories, speeding up their wear.

How can you not coat the fittings of plastic windows? Acids and chemicals attack the metal surface, “degrade” the anti-corrosion ball and oxidize the parts. Burnt and car oils are also not suitable. The first ones are expensive to build, but the dead ones should never be put away. Others are at a low level of purification.

How to grease gum pads on plastic windows

The disabled will also require surveillance. You can buy special oils, or you can quickly use the following methods:

• silicone-based oil;
• silicone lips;
• pharmaceutical glycerin, pure and simple, without cosmetic additives.

You can’t put Vaseline and baby powder on it. Likewise, people do not choose what to take revenge on the burglar, alcohol and meadow. The stench will lead to the ruin of the gumi structure.

The best idea is to use WD-40. Some harden that by using the aerosol to create a hydroisolating liquid on the surface. Others seem to be that at low temperatures the product thickens and the work of the window mechanisms shifts. If you don’t have this juice at hand, it can be used as butter for the disabled.

Criteria for choosing pastries

It is necessary to inspect window structures in a clear and verified manner. Poor acidity of the oil leads to a reduction in the service life of the mechanisms. When purchasing, take into account your region of residence, as these products may be subject to “damage” due to low temperatures.

Check with the salesperson at the store to see what type of plastic window is suitable for your model. Choose Koshti in aerosols. This is the most hand-made type of oil with gentle staining. For help with sawing, you can reach critically accessible parts of the mechanism. It’s not easy to buy expensive cats. Often their stock contains components that are found in inexpensive lubricants, but their operating principle is new.

How to coat plastic windows yourself

It is not obligatory to be a fakhivtsom in order to carry out preventive maintenance of window fittings. For this you need to know the sequence of actions and have the necessary materials at hand. Do not forget to remove all decorative trims from the hinges and handles.

Cleaning plastic windows

First of all, before covering the elements of the window structure, you need to thoroughly clean them with a brush and a saw. The window chairs open wide and look around kindly. All brackets, fittings and other loose elements will require cleaning.

To clean, use a soft cloth, a sponge or a brush. At the same time, a ball of old butter appears from the pond. After drying, wipe dry cloth and wipe all parts dry. During warm weather, you can close the window for independent drying. Remember that you cannot be victorious on your own. You can use WD-40 for metal elements. The frame will cost the equivalent of a mile. For brushes, use a stiff brush, giving special respect to the areas connected to doors and frames.

Mastilo accessories

First of all, you will need to understand and oil the plastic windows first. It is important to apply it to all elements that crumble during use. If the robot is sprayed with an aerosol, the process will be much easier. It is enough to spray the oil on a distance of 3-5 cm. It is necessary to coat with oils by digging them onto the straight bars of the cylinders, all rotating mechanisms and grooves. 2-3 drops will be enough. For ease of use, put the oil into a syringe or a small amount of oil, the tip of which is directed to the mechanism element. To ensure that the oil material penetrates well between the parts that are collapsing, the window of the chair must be closed. Opening and closing in different modes is easier to do several times. It is better to allow the person to go over all the details and clear them up more clearly.

The window is often coated with silicone. Before the procedure, the spray can is very timid. The opening for sawing is aimed at the element to be greased, at a distance of 3-5 cm. After pressing the valve, release the pressure for about two seconds. What will be enough, so that the ointment goes down the middle. The silicone in the cans is good because, due to its transparency, it does not leave traces on the surface. After oiling all elements of the fittings, oil stains are wiped off with clean gantry.

Construction of gorges

To ensure that the thick gum on the plastic window does not dry out and ensure that the chairs fit tightly, they need to be regularly oiled. Before washing, the lid will be opened completely, ensuring access to all wet areas. It’s best to clean it with a brush and a saw, and also with a few miles and leave it dry.

How professional skills are chosen and those that come from the home arsenal.

The product is applied to the cracks and, using a cotton swab, is evenly distributed over the entire surface. You can choose butter in a container with a roller at the end. It’s easier to apply the salt.

Frequency of the procedure for lubricating plastic windows

The frequency of PVC coating on the surface is dependent on the frequency of their vicor. The meanings and thoughts of living loom. For example, those windows that face the road will become more and more crowded. Apparently, you need to keep an eye on them more often, about once per river. Cover plastic windows better in the beginning of autumn or at the end of spring at above-zero temperatures. If you notice outside sounds that sound like a chair between periods of scrubbing, then do not wait for the appropriate time. Delaying the procedure may have a negative impact on the hardware and elements of the fittings.

The design of plastic windows, which is rapidly changing, is being given more and more new models. However, any stylish design may become wasted if the efficiency of the window fittings is not ensured.

When it is necessary to inspect window fittings

To ensure that your life is not marred by inconveniences associated with the improper functioning of the window chairs, give the fittings special respect. When cleaning the window fittings, we ensure that the surrounding elements and assemblies of the window fittings are cleaned and oiled. How to prevent the performance and functioning of window fittings?

The main function, or to be more precise, the functional special feature of the window system is the window fittings. All folding and robotic fittings for window chairs provide essential functions. In order for the window system to last a long time, it is necessary to properly regulate and systematically monitor the fittings.

When do you need to keep an eye on the fittings? The correct answer would be: “Regularly”, because if the fittings break, it will be too late to get rid of them.

Adjustment of fittings for plastic windows

fittings verification parameters

The installation of window fittings and the robot must be checked for the following parameters:
reliable fastening of elements and fittings parts
process and results of wear of elements and parts
ease of movement of window chairs.

It is clear that due to the reliable fastening of the fittings elements, there is a certain reliability. It is therefore recommended to check the fit of the fastening screws on the system. If weakening of the ligaments is detected, it is recommended to tighten the screws.
However, over time, the process of wearing out the elements and parts of the window system takes place. To prevent window fittings from being worn out, it is necessary to clean and oil most of the essential parts.

The ease of movement of the window chairs can be reached with the help of basic adjustment techniques.
In addition, the regulation of window fittings includes:
removing sagging, blowing out window chairs or balcony doors
regulation of free pressure and movement
transfer of the window system from the “winter” – “summer” mode
frequent replacement of plastic window fittings
preventive cleaning and lubricating of fittings elements.

Adjusting the PVC window with your own hands does not take many hours. When working, it is necessary to accurately know the progress of the main units of regulation and adjustment. Regulation is carried out using special tools and devices that allow you to solve the problem of adjusting the fittings of a plastic window.

To adjust the closure of the window chair, turn the part of the eccentric that protrudes against the inner surface of the window system, and to loosen it into the outer side.
The video will help you how to adjust the accessories with your own hands.

Adjustment tools

For all types of work involving regulation, systematic cleaning and oiling of Vikon PVC fittings, the required operating tools are:

Hex key 4 mm
Khrestova twist, size 3
set of exchangeable attachments for twisting (stretch “zirka”, marking T)
pliers
aerosol for oil WD-40.

A hex key, which is commonly called a furniture wrench, has a standard shape and size and is the main adjusting tool. Adjustment of fittings takes place at the base points. It can be guessed that the base points are:
vertical adjustment of window chairs
adjustable window chairs horizontally
adjustable chairs
adjustment of the lower horizontal section of the chairs.

Using the hex key itself, you can make adjustments at all basic points.
By turning the bolt behind the anniversary arrow or against the anniversary arrow, the position of the window chairs moves horizontally to the right or to the left. If there is any change in the position of the window chair, it is recommended to monitor and verify the functionality of the window system after using the control tool. To achieve a positive result, repeat the adjustment procedure.

Adjustment of fastening elements

Fastening of window fittings to the transmitter is carried out using additional bolts with a cap under a cross twist. Therefore, by tightening the hex wrench and cross screw, it will be possible to loosen the fastening:
adjusting bolts on the “knife” system
adjusting bolts on the lower canopy
adjusting bolts on the top canopy
Magnetic balcony clamp
pressure mechanism
trunnion adjustment
pens.

Depending on the brand of the manufacturer of plastic windows, the fittings and algorithm of regulation do not change in principle. For the window panes, you can go to the “Pershodzherel” - report descriptions and technical instructions for the main manufacturers of window fittings Roto, Rehau, Maco, Veka.

Window fittings are being cleaned and lubricated.

During the operation of window systems, a significant amount of wood saw and wood accumulates on fittings and cracks, which absorbs the wear of dry elements. When cleaning regularly, special care must be given to the release mechanism. To clean the “knife”, it is recommended to use a brush with stiff bristles using a long hand. Remove the sawdust from the main nodes of the elements, and then wipe with a soft sponge.

To lubricate window fittings, it is recommended to use special oils and aerosols with a long nozzle, such as the aerosol for greasing WD-40z. Aerosol packages with mastyl should be equipped with hand-dry tips that allow easy penetration into sensitive areas. The paste is applied in drops, spread on both sides of the unit or a component of the fittings.

It is not recommended to use high-quality oils, as they contain acidic, aggressive and resinous substances. It is recommended to replace the main functional components of the window system, including silicone clamps. The vibrating oil of window fittings and drawers can always be turned off or the possibility of suction traction can be eliminated.

Wednesday 24, 2016
Specialization: professional in repairs and repairs (the latest cycle of maintenance work, both internal and external, from sewerage to electrical and finishing work), installation of window design. Hobbies: marvel at the stuff "SPECIALIZATION AND NAVIKI"

The topic of how to lubricate the mechanism of plastic windows will begin to appear even if you lubricate the skin with tan. As a rule, we consider this procedure in case of difficulty in opening and closing, in case of extraneous noise in the mechanism, in case of breakdowns, causing abrasions, etc. Here you won’t be able to get by with preventive lubricant - you’ll have to end up with frequent disassembly and cleaning (or even repairs by replacing parts), but it’s long and difficult.

To avoid letting the situation develop to such an extent, it is necessary to think about the usefulness of the fittings in advance. So this article is written to us in advance of those who have recently installed a window: if you don’t want to spend money on paying for the mayor’s services for regulation and repairs - read it with respect!

Zavdannya Mastila

For the leapness of the function of the Councils, the values ​​of the seniority of the seniority of the components of the structures: the great Kilkіst is Rukhomikh Elementiv Vimaga, the Great Mastil in the VSIC MASTIC Contact to the metallo:

1. Applying varnish to the metal parts reduces the level of abrasion. Due to this change, the fittings become lighter, which immediately reduces the level of wear of the parts that rub.

The more important the chair, the greater the expression of this effect. For fitting complexes oriented towards the operation of important structures, manufacturers introduce additional bushings made of fluoroplastic - they reduce friction even more strongly, but without any damage they wear out quickly.

1. Effectively, the effective oil makes it easier to manipulate the chairs: after regular preventive maintenance, the fittings collapse without any harsh forces, the pins are easy to fit behind the latches (the slats are aligned).
2. Heavy coating of metal – protection against rust. Naturally, the fittings are initially covered with a number of anti-corrosive materials, and in this case the oil acts as a barrier to the surface.
3. It is not only the fittings that need to be tightened, but also something else: by applying special folds, the polymer contours retain their elasticity, and the pressure of the chairs to the frame is greater.

As you know, keeping an eye on the PVC is a matter of course and sense. Prevention not only makes it easier to perform basic operations (opening, closing, installing), but also extends the life of the virus. And if you have an old window with fittings that are no longer released, then the oil will be easily at hand: without getting dirty, the mechanism will break, and it will be impossible to find a part to replace.

Accessories

What can I do?

As you know, it is obvious that it is necessary to wash the window. So we are deprived of choosing a warehouse for preparing the surface to rub and apply it correctly. Here it is necessary to be careful: the use of uneven components will not only improve the situation, but will lead to an increased level of wear on the fittings.

Well, let's wonder how to decorate the fittings of plastic windows in the most beautiful way:

1. The ideal option is lubricant that is oriented to work with modern mechanisms. You can buy a kit from the warehouse for keeping an eye on the windows or adding water. As a rule, the basis of such a product is silicone, which, when applied to the surface of the metal, forms a thin and stable melt. Mastila is produced in tubes or in sprays, you can choose from two options.

1. The silicone universal lubricants in stock are practically identical to those included in the “last” kits. We definitely won’t be able to borrow a tube or a can of such a container from the state, so it’s a safe bet to buy it. What’s more, the price of the money is quite reasonable, and so much is spent economically that you can turn one balloon into a bunch of rocks.
2. Mastila for bicycles or sewing machines. Essentially, it’s machine oil, only highly refined. It is easy to apply and adheres well to metal surfaces of fittings.

1. Universal mineral or synthetic ointment. There are a few more options than options, over-insurances, or the same thing. Smut, so that no abrasive particles, acids or other aggressive reagents enter the material storage.

If you use standard oil material, then preventive robots just need to work a little more often, and when working on the parts that need to be rubbed, be a little more respectful, that’s all.

Why is it not possible?

Now a few words about the kind of oil that cannot be applied to PVC-vikon fittings:

1. Roslinna olives – olive, kukurudzyan, sonyashnikov. After applying the oil, it dries for two or three pulls, allowing the saw to reach a high speed during this hour. As a result, a viscous, thick ball of material with abrasive properties is created on the surface of the fittings. It’s clear that it will continue to collapse, and the stage of wear and tear will grow at times.

1. Warehouses that prevent extinguishing, liquids, acids and other aggressive components. When such oil gets on the surface of the fittings, it provokes the destruction of the anti-corrosion coating, accelerating the oxidation of the metal.
2. Automotive lubricants, especially those with low cleaning power.
3. Oliya zbroi. First of all, it’s expensive, on the other hand, not all stinks are suitable for the protection of metal from corrosion, so it’s not good to check the fittings!

Wheat butter - stinks like yoghurt: not all of it is cinnamon

What is required?

Well, we have chosen this oil, now let’s wonder how to properly apply it with our own hands.

The instructions will be simple and convey the following sequence of actions:

1. The window chair is opened and placed in a rotating position. This way we will have access to all the fittings.
2. Plastic pads are removed from the upper and lower hinges to protect the mechanism from the saw and saw.
3. Using a brush and coarse bristles (natural, synthetic, not metal), we clean all parts of the fittings to remove debris (saw + old grease).

1. We wipe all metal surfaces with an alcohol cleaner or a clean cloth. The stain can be cleaned by wrapping a toothpick in a serving cutter or using a thin and long haircut.
2. Apply ointment to the loops: two or three drops per joint.
3. Then we drip the oil into the opening on the fittings. Some printers indicate such openings with special pictograms near the oil pan, otherwise there are none - just pour two or three drops onto all the slots. Too much oliya viteche, і mi її vitrіmo!

1. Now we need to distribute the oil behind the mechanism. For how many times the window is opened and closed, turning the hinges in all possible modes (turn-opening, tilt-opening, partial ventilation, micro-ventilation). In this case, the internal components of the fittings are gradually covered with mastic.

That's it! Our fittings are greased, and we only have to carefully wipe the gantry molasses oil on the inner surfaces of the chair and on the front part of the profile.

Ushchilnyuvach

Select material

Dimensioning about those with which to coat plastic windows, many authorities will exchange preventive measures for fittings. However, there is one more detail that requires such attention, and is not derogatory. Applying ointment to the crevice contour allows you to enhance its elasticity, and this, in turn, ensures a tight seal between the chair and the frame.

In addition, good pressure more effectively protects the fittings from sawing and drying of dry coating, so that smearing can be carried out less frequently.

To restore elasticity, strengthen and prevent drying, the following warehouses are used:

1. Silicone spray - either special, from the service kit for PVC windows, or universal.
2. WD-40 is a warehouse that may be needed by every motorist, mechanic, etc. It’s expensive to finish, but for the processing of the worsening yogo and the need for everything and nothing.

1. Glycerin is a budget option that better matches the elasticity of most polymers. It dries quickly, which is easily compensated for by frequent cutting.
2. Vaseline is a great option for warm climates; the fragments become dull in the cold. Again, it’s drying up, there’s no special oil, so it needs to be applied more often.

Warehouses with alcohol, retailer, automobile oils and vicors are not very good. There is no need for vegetable oils - after processing, the strengtheners may either lose elasticity or begin to crack.

Applyable ointment

It’s extremely simple to learn how to paint the contour of the gorge yourself:

1. We open the window, providing access to the “knocks” on the frame and chair.
2. Use a wide pencil or a brush to sweep away the saw from the grooved contour.

1. We wipe the polymer inserts with a soft scraper for residual cleaning.
2. We apply the oily material to the wound, then distribute it evenly with a cotton swab or a dry cloth.

Once you have figured out how to lubricate the window, the time has come to move on to the rest of the diet - up to the frequency of processing:

1. The factory oil on the fittings tends to last well. Therefore, first prevention can be carried out no earlier than two or three days after installation.

Over the course of time, we listen to the robotic mechanism, and when creaks and other extraneous noises appear, we experience consistent inputs.

1. Servicing of fittings and equipment should be carried out at least twice a day. Optimally - for birch leaves before the summer season and for autumn leaves before the winter season.

1. Autumn prevention should be based on stagnation of cold-resistant materials. This is due to the fact that cheap butters go bad in the cold and may not cope so well with their obligations. And it’s very important that we pick up the scraps ourselves and open the chair for airing once a day for a short period.
2. Residents of industrial regions, as well as residents of apartments with windows that have access to the highway, should increase the frequency of cleaning, lubricating fittings and cleaning. Here the minimum should be at any time on the river, otherwise it would accumulate very intensely, and in the process it will soon be replaced by severe wear of the pressure rollers and other parts.

Visnovok

It is very important to know what window fittings can be coated with and what they cannot, and it is also important to understand the technology of applying oil: what determines the service life of the window and the likelihood of its failure. That’s why I strongly recommend that everyone watch the video from this article, read my recommendations, and if you then lose your nutrition, be sure to put them in the comments and on the forum.

24 June 2016

If you want to clarify something, add clarification or what is listed, please ask the author - add a comment or say thank you!